Stop Your Haas from Crashing with Zero Gage Length Tools!

It seems crazy that a brand-new CNC machine can crash if an operator forgets to set a tool length! It's far too easy of a mistake to make with catastrophic - and expensive - consequences!

This simple line of G-Code will stop any HAAS CNC machine from running if a tool has a 0.0" gage length (0.0" is the default value from the factory)! Even better than stopping the machine, we also create a custom alarm telling the operator that they need to set the tool length.

Note:
1) This method still doesn't stop the machine from crashing with the WRONG tool length
2) There are many other ways to tackle this problem; one other suggestion is setting all tools to a long length.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Links for this video

Haas TOTD on Macros: https://www.youtube.com/watch?v=G6vHC9Z1eBs
Haas Macro PDF: https://bit.ly/40fyYYG

~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reach us / CNC Info:

Fusion 360: http://dsi.fyi/3yu7Mt0

CNC & Fusion 360 Training: https://bit.ly/3TRHs4J

SMW Products: https://saundersmachineworks.com/

Speeds & Feeds: https://provencut.com

CNC Resources: https://www.nyccnc.com

Видео Stop Your Haas from Crashing with Zero Gage Length Tools! канала NYC CNC