Honda CB400 Revo 2011 Speedometer Digital Display Polarizer Film Replacement

Successfully managed to replace my Honda CB400 polarizer film in first try. The problem starts and i was unable to read the odometer and fuel gauge. This makes it hard for me to know when to top up my fuel. Film was sun damaged due to normal wear and tear if you park in the open.

In this video, i show you the steps required to replace the polarizer film easily, saving money. You can do this method for any types of speedometer. Unforturnately, i did not capture the part where i cut and paste the polarizer film(camera battery went dead). This is fairly easy, just align it until you achieve desired background colour - black or original.

Tools required:
Phillips screwdriver
Isoprophyl alcohol
Wipes
Polarizer film with adhesive for easy installation

Possible signs of sun damaged speedometer:
The center part of your digital display turns black
Display faded and become hard to read and eventually disappear

0:25 Remove back cover from base
1.36 Remove front panel from base
5:18 Prying of needles
6:43 Faceplate remove
9:18 Remove polarizer film from glass
19:02 Re-assemble
31:41 Fail test after needles wrongly installed
32:07 Pass test after needles correctly installed

Видео Honda CB400 Revo 2011 Speedometer Digital Display Polarizer Film Replacement канала MotoSG