Table Saw Jointer Jig - Easy to Make
If you don't have a jointer but you do have a table saw then this tablesaw jointer jig can get you by. It's easy to make and very effective. The jig isn't as good as a jointer, you can't adjust the depth and it doesn't leave as good a finish but it does square the timber up very well. It depends on the height of your saw blade but I get a 4" cut off my 12' saw blade, so not too bad!
Even if you have a jointer then this can still be of use, especially if you work with reclaimed timber. I'm happier to put that sort of material with its dust, dirt and debris through my saw blade and save the jointer blades for when I'm working with better timber.
As always I'm happy to answer any questions.
If you would like to support this channel you can do so here
https://www.patreon.com/PaskMakes
You can also help me out by purchasing one of my shirts, you can find them here https://paskmakes.threadless.com
Check out my new website
http://paskmakes.com/
Check out my Instagram to see more of my work https://www.instagram.com/paskmakes/
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) http://www.neilpaskinphotography.com
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia
Видео Table Saw Jointer Jig - Easy to Make канала Pask Makes
Even if you have a jointer then this can still be of use, especially if you work with reclaimed timber. I'm happier to put that sort of material with its dust, dirt and debris through my saw blade and save the jointer blades for when I'm working with better timber.
As always I'm happy to answer any questions.
If you would like to support this channel you can do so here
https://www.patreon.com/PaskMakes
You can also help me out by purchasing one of my shirts, you can find them here https://paskmakes.threadless.com
Check out my new website
http://paskmakes.com/
Check out my Instagram to see more of my work https://www.instagram.com/paskmakes/
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) http://www.neilpaskinphotography.com
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia
Видео Table Saw Jointer Jig - Easy to Make канала Pask Makes
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Build a Table Saw Jointer Jig | Woodworking DIY TutorialTools you DON'T need: Jointer vs Planer vs Drum sanderMy Top 4 Table Saw Jigs & Accessories: How to Make ThemMaking a 225 Piece Jigsaw Puzzle - (Day 5) 7 Scrapwood Challenges in 7 Days - ep47Top 10 Woodworking Table Saw Jigs and Accessories & How To Make Them - According to MeMaking a Workshop CabinetSMALL Cross-Cut Sled with ADJUSTABLE Fence, EXTENSION wing and BEVEL Feature!Jointer sled / straight cut jig / table saw sledHow to make a Vintage Style Drill IndexMini Workbench (Extendable) - Scrapwood Challenge Ep18Milling Rough Lumber Without a Jointer Using a Few Simple JigsWoodworking Tricks You'll Actually Use // How Did I Not Know These ThingsRouters - 7 Important Things You Should KnowA step-by-step guide to making your first table saw cuts. TABLESAW BASICS.5 Ways to Joint a Board Without a JointerQuick & Dirty Table Saw Jointing Jig7 Homemade Marking Tools for Woodwork - Scrapwood Challenge ep27Make a Benchtop Jointer5 Ways to Joint Boards Without A Jointer | Woodworking TipTurn Your Hand Planer into a Jointer for Only $10