Crazy Prototype Setup On The Bridgeport Running Masso And Clearpath Servos
Running my 9x20 lathe on the table of the bridgeport mill after a little reprogramming of the post processor for fanuc generic turning.
The part is for a good friends door hinges on his antique safe.
roughing speeds and feed
.010 doc
spindle 1000rpm
8 ipm
finish speed and feeds
.005 doc
1000 rpm
8 ipm
Видео Crazy Prototype Setup On The Bridgeport Running Masso And Clearpath Servos канала John lambert
The part is for a good friends door hinges on his antique safe.
roughing speeds and feed
.010 doc
spindle 1000rpm
8 ipm
finish speed and feeds
.005 doc
1000 rpm
8 ipm
Видео Crazy Prototype Setup On The Bridgeport Running Masso And Clearpath Servos канала John lambert
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
240sx 20psi of boost ka24det godspeed turbo aem.Masso Setup Screen Explained for the Bridgeport Conversion.New Leblond 19" Lathe For The Shop1964 F-100 Tilt BedMaking Soft Jaws on the Bridgeport and Massoka24det New aem ecu idle1964 F-100 Electric Rack And Pinion Swap Crown Vic.9x20 Lathe CNC Conversion With Masso And Clearpath Servos Part 22.0 bus motor start up new buggy motor.Rivet Removal Made EZTrial of the new beam on the wood splitter.2015 Ford Fiesta Top Speed RunNew Tools For The Expanded Masso Tool List On The Bridgeport1964 F100 Crown Vic Swap Part 3.JB3 moto custom bikesmower racingMoving Some Large Wood With Some Great Friendsjimmy hit n a big mudd hole on the foremanSlow Motion Fly Cutting on the BridgeportFirst Tool Change Part With The Masso Controller and Clearpath Servos.