Simple Battery Charger with Auto Cut-Off Protection | Automatic charger for 12V & 6V Battery

This video is about making a simple battery charger for 12V and 6V lead-acid batteries.
JLCPCB: $2 for 2Layer, 5pcs & $5 for 4Layer, 5pcs: https://jlcpcb.com

#AutomaticCharger #12VoltBatteryCharger #AutoCutOffCharger

The charger is equipped with the auto cut-off circuit to protect the battery from overcharging. This is a simple battery charging circuit with protection. I have explained the entire circuit step by step. You can use this project for college or school projects.

Download the Schematic: https://www.opengreenenergy.com/post/diy-battery-charger-with-auto-cut-off
-----------------------------------------------------------------------------------------------------------------------
Components Required:

1. Transformer 230V/12V: https://amzn.to/2Mg1NCK

2. Bridge Rectifier: https://amzn.to/3qCGEBI

3. Diode 1N5408: https://amzn.to/2NnF3Bn

4. Diode 1N4007: https://amzn.to/2NwubS5

5. Transistor BC547: https://amzn.to/398hPYB

6. 12V Relay: https://amzn.to/3qVTYl5

7. Resistor 10K: https://amzn.to/360xxmw

8. Resistor 1K: https://amzn.to/360xxmw

9. Trimpot 10K: https://amzn.to/2Y5dz5W

10. Capacitor 1000uF/25V:https://amzn.to/3bZNE7K

11. Capacitor 10uF/25V: https://amzn.to/360GLPx

12. Screw Terminals: https://amzn.to/3c3UMQj

13. 5mm LEDs: https://amzn.to/2LVdRd0

14. Perforated Board: https://amzn.to/3p9HbLc

15. PCB Standoffs: https://amzn.to/3c2oNA9

Видео Simple Battery Charger with Auto Cut-Off Protection | Automatic charger for 12V & 6V Battery канала Open Green Energy