How to repair bass boat clear coat

Ok I tried to be as detailed as possible. I did make two mistakes when I did the first two repairs. I did not sand out far enough or rough up the surface enough. This makes the gel coat peel a bit and not sand smooth into the finish. Make sure you sand where ever the gel is going to go out to. It won't make a difference because you will be putting new gel in that area. I know it seems difficult to sand your boat so much but the areas that I sanded almost too much came out perfect. Also, make sure you measure your mixtures for the gel, styrene, and MEK-P. If you don't the gel will not cure completely. Thanks for watching and please don't forget to like and subscribe!!!!!

Видео How to repair bass boat clear coat канала Adventures Midwest