3 Steps To Pulling Out A Dent On A Car
See the 3 Steps To Pulling Out a Dent on a Car
https://www.exceldentremoval.com
I will show you the 3 Steps Used To Pulling Out a Large Dent on a Car Fender
This damage that dented the fender was either caused by someone backing into the vehicle or hitting the side on the car with a bumper.
This type of dent is complex and will need several steps to properly repair with paintless dent removal.
1⃣ The first step used to pull out this dent is with the use of a cold glue.
This pulling method uses a slide hammer and a sticky cold glue to pull out a large amount of the damage.
2⃣ The second step used to fix this dent is by using PDR tools to apply leverage and pressure to the back of the panel. This process will push out the dent to bring out some of the damaged area.
3⃣ The third step used to repair this dented fender is with hammers, knockdowns , and blending the metal to push down and move the crowns back into the dented area.
All of these 3 Steps are repeated multiple times until the damaged panel is restored back to its pre-damaged condition.
*****
Subscribe To My Paintless Dent Removal Channel:
https://goo.gl/ZVlsrz
*****
------------------------------
Check out my list of recommended PDR tools on Amazon https://goo.gl/vVrHxQ
-------------------------------
************
As an Amazon Associate I earn from qualifying purchases.
Some links may be affiliate links. You won't pay more for using them, but I may receive compensation for the referral.
If you found these videos and links helpful, then I appreciate it.
**********
0:00 Pulling Out A Dent In A Damaged Fender
0:09 How Was This Dent Caused
0:20 Inspect The Damage
1:12 The 3 Steps To Pulling Out a Large Dent
1:40 Pulling Out The Dent With Cold Glue
3:09 Minnesota Paintless Dent Repair Shop
3:35 Pushing Out The Dent
5:06 Repairing The Crease
6:14 Knocking Down The Crowns
7:54 Detail Pushing and Cleanup To Finish
8:48 Recap The 3 Step Process of Paintless Dent Removal
9:28 Final Results of Fixing a Large Dent In a Car
************
*****The Paintless Dent Repair videos on the Excel Dent Removal YouTube channel are designed to share what high-quality paintless dent removal can produce when done by a qualified PDR technician.
These PDR videos are not for teaching or training purposes or for those looking for DIY methods of dent repair. If you want to attempt these repairs, then you do so at your own risk, whether personally or by additional damage to your car.*****
Excel Dent Removal
1550 91st Ave NE STE 303
Blaine, MN 55449
Phone: (763) 780-4000
Excel Dent Removal Website:
https://www.exceldentremoval.com
Google Map and Directions to Excel Dent Removal:
https://goo.gl/NVR6AZ
Excel Dent Removal's Google Business Site:
https://goo.gl/ZzNSxN
=================
Subscribe:
https://goo.gl/ZVlsrz
Youtube Channel:
https://goo.gl/EimW1A
Facebook:
https://www.facebook.com/exceldentremoval
Instagram:
https://www.instagram.com/exceldentremoval/
Twitter:
http://www.twitter.com/exceldentrepair
Excel Dent Removal Blog:
http://www.exceldentblog.com/
=============================
Watch this Paintless Dent Repair Video Here: https://youtu.be/1vPNKzspagc
=============================
Видео 3 Steps To Pulling Out A Dent On A Car канала Excel Dent Removal
https://www.exceldentremoval.com
I will show you the 3 Steps Used To Pulling Out a Large Dent on a Car Fender
This damage that dented the fender was either caused by someone backing into the vehicle or hitting the side on the car with a bumper.
This type of dent is complex and will need several steps to properly repair with paintless dent removal.
1⃣ The first step used to pull out this dent is with the use of a cold glue.
This pulling method uses a slide hammer and a sticky cold glue to pull out a large amount of the damage.
2⃣ The second step used to fix this dent is by using PDR tools to apply leverage and pressure to the back of the panel. This process will push out the dent to bring out some of the damaged area.
3⃣ The third step used to repair this dented fender is with hammers, knockdowns , and blending the metal to push down and move the crowns back into the dented area.
All of these 3 Steps are repeated multiple times until the damaged panel is restored back to its pre-damaged condition.
*****
Subscribe To My Paintless Dent Removal Channel:
https://goo.gl/ZVlsrz
*****
------------------------------
Check out my list of recommended PDR tools on Amazon https://goo.gl/vVrHxQ
-------------------------------
************
As an Amazon Associate I earn from qualifying purchases.
Some links may be affiliate links. You won't pay more for using them, but I may receive compensation for the referral.
If you found these videos and links helpful, then I appreciate it.
**********
0:00 Pulling Out A Dent In A Damaged Fender
0:09 How Was This Dent Caused
0:20 Inspect The Damage
1:12 The 3 Steps To Pulling Out a Large Dent
1:40 Pulling Out The Dent With Cold Glue
3:09 Minnesota Paintless Dent Repair Shop
3:35 Pushing Out The Dent
5:06 Repairing The Crease
6:14 Knocking Down The Crowns
7:54 Detail Pushing and Cleanup To Finish
8:48 Recap The 3 Step Process of Paintless Dent Removal
9:28 Final Results of Fixing a Large Dent In a Car
************
*****The Paintless Dent Repair videos on the Excel Dent Removal YouTube channel are designed to share what high-quality paintless dent removal can produce when done by a qualified PDR technician.
These PDR videos are not for teaching or training purposes or for those looking for DIY methods of dent repair. If you want to attempt these repairs, then you do so at your own risk, whether personally or by additional damage to your car.*****
Excel Dent Removal
1550 91st Ave NE STE 303
Blaine, MN 55449
Phone: (763) 780-4000
Excel Dent Removal Website:
https://www.exceldentremoval.com
Google Map and Directions to Excel Dent Removal:
https://goo.gl/NVR6AZ
Excel Dent Removal's Google Business Site:
https://goo.gl/ZzNSxN
=================
Subscribe:
https://goo.gl/ZVlsrz
Youtube Channel:
https://goo.gl/EimW1A
Facebook:
https://www.facebook.com/exceldentremoval
Instagram:
https://www.instagram.com/exceldentremoval/
Twitter:
http://www.twitter.com/exceldentrepair
Excel Dent Removal Blog:
http://www.exceldentblog.com/
=============================
Watch this Paintless Dent Repair Video Here: https://youtu.be/1vPNKzspagc
=============================
Видео 3 Steps To Pulling Out A Dent On A Car канала Excel Dent Removal
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Excel Dent Removal Hail Repair Reviews | 200+ 5 Star ReviewsHow I Repair a Door Ding at Excel Dent RemovalHow To Pull Out a Fender DentPUSH or PULL a Dent Out | Which One Will Work?Does PDR Cost Less Than Auto Body Repair #shortsFixing A Common Car DentPulling A Dent With Cold Glue #shortsHow To Repair Small Dent in Car DoorHow To EASILY REMOVE Hot Glue From CarHow I Repair Hail Damage Dents | Paintless Dent Removal Under a BraceI Messed Up This Dent By Using Glue Pull Paintless Dent RepairBIG DENT REPAIR with Paintless Dent Removal | Ford F150 Tailgate DamageSUPER SHARP DENT Repair | Paintless Dent Removal for a DEEP CREASEWhen Glue Pulling a Dent WON’T Work | Paintless Dent RepairPaintless Dent Removal Technique To Repair a Large Fender DentAluminum Crease Paintless Dent Repair on a 2018 Ford F150PDR for a Long Crease Using Paintless Dent Removal on a Truck BedFixing a Crease In a Fender with Paintless Dent RemovalPaintless Dent Removal for a Crease DentPDR Glue Pulling Dents in a Truck Roof Rail