Restoration of a 50 year old Huge Rusty Drill Press. Awesome result!
I got this drilling machine for the price of scrap metal. The headstock raise/release mechanism did not work, the headstock lock lever was jammed, the drill chuck was rusty and jammed, the on/off button was missing, all the electrics were rewound with duct tape. BUT the motor worked!
Restoration process.
First of all, I completely disassembled the drilling machine into parts. Some control levers were broken and new ones had to be made on a lathe.
I cleaned the parts of the hull using a paint remover and a rust converter.
I really like to use hammer effect paint on the body parts. Since the case is made of cast iron, it has an uneven surface and it is the hammer effect paint that hides all these irregularities, while the spray paint would only emphasize all the flaws.
During the repair was completely moved the engine. Rust was even on the rotor! Replaced all bearings and painted body.
The bearings on the spindle were also replaced!
In general, the work was not difficult but took a lot of time, and I will be grateful for the "thumbs up" pressed so more people will see the video and I will compensate for the cost of repairing this drilling machine! THANK YOU
I enjoyed working on this project, and upon completion, I had another "helper" in my workshop, who will often appear in the following videos.
So click "subscribe" and be sure to "bell" otherwise YouTube will not notify you about the release of a new video.
Good luck everyone and take care of yourself!
Sincerely, Max!
#awesomerestoration
#drillpress
#restoration
Видео Restoration of a 50 year old Huge Rusty Drill Press. Awesome result! канала Restoration In The Back Room
Restoration process.
First of all, I completely disassembled the drilling machine into parts. Some control levers were broken and new ones had to be made on a lathe.
I cleaned the parts of the hull using a paint remover and a rust converter.
I really like to use hammer effect paint on the body parts. Since the case is made of cast iron, it has an uneven surface and it is the hammer effect paint that hides all these irregularities, while the spray paint would only emphasize all the flaws.
During the repair was completely moved the engine. Rust was even on the rotor! Replaced all bearings and painted body.
The bearings on the spindle were also replaced!
In general, the work was not difficult but took a lot of time, and I will be grateful for the "thumbs up" pressed so more people will see the video and I will compensate for the cost of repairing this drilling machine! THANK YOU
I enjoyed working on this project, and upon completion, I had another "helper" in my workshop, who will often appear in the following videos.
So click "subscribe" and be sure to "bell" otherwise YouTube will not notify you about the release of a new video.
Good luck everyone and take care of yourself!
Sincerely, Max!
#awesomerestoration
#drillpress
#restoration
Видео Restoration of a 50 year old Huge Rusty Drill Press. Awesome result! канала Restoration In The Back Room
Показать
Комментарии отсутствуют
Информация о видео
14 января 2023 г. 23:30:03
00:25:01
Другие видео канала
Restoration of an Old Planer. Very Amazing Handle!Restoration of a toy truck!1956 Filmoscope Restoration. How to bend laminated fiberboard?Travel suitcase restoration. Found 20 000 💲 under a secret bottom.Restoration of an old Emergency Stop Lamp❌❌❌!1882 SINGER Sewing Machine Restoration. Working after 140 years!!!Vintage Kitchen Scale Restoration.Restoration Antique iron 1900's. Desert testing and Incredible Handle.Restoration of a toy truck. It was made at the tractor factory!Restoration of an Old Railway Lantern. Beavers that Gnaw Iron.Restoration of a pocket Alarm Flashlight. Beautiful result.Full Restoration of a Large and Very Rusty toy excavator. I was Amazed by the Result!!!Revival of the T-55 Tank. The second Life of a Toy.Restoration and Repair of an old German Compass. The most Beautiful compass STAND.Restoration of an Unusually Rare doorbell. A Ghost Called ME!Secrets of the miner's lamp. Oil lamp restorationAntique Alarm Bell Restoration. Making a Copper Bell.1889 Mini Flamethrower: Restoration and InvestigationRestoration of an Old Planer. Very Amazing Handle!Restoration of a Large Felling Ax from the 19th century. Magnificent Handle!