How to Oxidize (Age) New Wood & Get A Vintage Look

UPDATE (8/2/19): I made a new video about this technique over here: https://www.youtube.com/watch?v=JvyUkSenWK0

When it comes to home decor, vintage is definitely in. But if you have ever done some DIY woodworking projects, you'll know it can be hard to obtain that aged wood look. You can either buy pricey "barn wood" from a boutique lumber supplier or let your new lumber from Home Depot sit in the backyard, exposed to the elements for a couple of midwest winters. OR you could use this easy, inexpensive method for aging your wood in just under a week.

What You'll Need

For this product you'll need a few household items from your pantry and garage:

- unfinished, untreated, and sanded wood
- white vinegar
- #0000 grade steel wool
- large (24 oz) glass jar
- black tea (~10 bags)
- disposable paint brushes
- 400 grit sandpaper

Creating your oxidation solution is straightforward. Take a roll of steel wool and tear off bits into your glass jar. Pour in the vinegar until your jar is full and cap the jar with the lid. Oxidation of the steel wool will take about 4-5 days in my experience. In general, the longer your solution can oxidize, the darker your wood color will be. I tested my solution on some pale pine wood after 3 days and it had a nice dark yellow hue to it. After about 6 days of sitting, the solution produced a dark gray. Because every wood will react differently, I would recommend testing your solution on scrap wood to see what kind of hue you'll get.

To help give your wood more definition and properly prep it, you'll want to brush it with a some strong black tea. I brewed some rather strong tea with 10 bags in 2 cups of boiling water. As you can imagine, the tea will slightly stain your wood, but it will also give your wood grain more of a pop. I also discovered that the black tea gives the wood a nicer finisher when you finally apply your oxidation solution. If you skip the tea step, and just use oxidation solution, the wood ends up looked just dirty and not aged. There's just something about that tea that gives the wood a more refined look - sort of how British accents make things seems more sophisticated.

When you're wood is dry from high tea, and after the oxidation solution has sat for 4-5 days, your wood will be ready to get "the look". When you crack open (not literally) your jar, there will probably still be steel wool floating in the solution - that's ok. If you leave the solution sitting long enough, eventually all steel wool remnants will dissolve. And you can save the solution for future projects. Using a foam brush, paint on the solution. The wood will almost instantly turn gray, and over the next 10 minutes, it will get even darker.

After the wood has dried, give it a light sanding with 400-grit sandpaper. This will help lighten up the stain and even out the color. The more you sand the wood, the more you'll remove the stain (obviously), but it can produces some unique variations in the grain - up to you, but again, be sure to experiment on some pieces before applying to your final project.

For the finish, I use a clear semi-gloss Poly Whey Furniture Finish from Vermont Natural Coatings. This is a really easy-to-use finish with low odor, quick dry time, and it feels great to the touch. I can't recommend it highly enough, and you have it shipped right to you from Amazon. I like to lightly sand with 400-grit sandpaper after each coat to keep that super smooth feel, and I would recommend applying 3 coats of this finish.

So what will you build now that you know how easy it is to get this vintage wood look? I've got a few projects up my sleeve, and when you think about, the sky's the limit. Imagine building your own farm or a little box for holding those bathroom towels that you're not suppose to use - whatever!

Let me know if you have any ideas in the comments below, and I would love to see what you build.

#woodworking #DIY #woodstain

Видео How to Oxidize (Age) New Wood & Get A Vintage Look канала Gadgets and Grain