Welding cracks in Alloy wheels - Is it safe?
An Alloy wheel that had already had two cracks in the rim welded, had been damaged again & needed another crack repaired. The rim had been hit & dented right where a previous repair had been made. A pretty good test of that weld I think! But then I needed to get rid of the dent...
Видео Welding cracks in Alloy wheels - Is it safe? канала MidEngineering
Видео Welding cracks in Alloy wheels - Is it safe? канала MidEngineering
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Chasing threads to repair a Riveter
How to properly put a cutter in a Clarkson Autolock Collet Chuck.
Chuck vs. Collet. Turning down & re-threading Damper rods
The danger of using old Abrasive Belts
Restoring the steering column splines on a Ford Thunderbird steering box.
"Barn Find" Surface Grinder.
Making the centre hole in an alloy wheel bigger!
Making an Outboard motor steering plate from 10mm thick Stainless Steel. NOT easy! (Part 1)
Steam Press repair - slow way & quick way to remove damaged screws, plus TIG welding a hole.
Fabricating Curved Box Sections from sheet Steel & Aluminium (or Aluminum !) MIG & TIG welding.
Hard Turning
A small Form Tool for turning Aluminium
Turning down die cast Tap Handles
Unboxing & try out of some unusual Digital Calipers
Repairing a Ducati exhaust port thread. Part 1 - machining the cylinder head.
Center Line Wheels - Shiny!
Earth Lead Refurb for our shop-made welding turntable.
Machining quickie - Drill & Tap Brass DRY
Making & using a guide bush for a broach.
Aluminium Casting Repair - AC TIG Welding
Diddly Job done "arse about face"!