220V 30W Desoldering Suction Pump : Product Review (Hindi)

Electric dual-use suction pump can be used to take the components off the circuit board while not damaging the components and circuit boards. It is specially used for the replacement of integrated circuits and multi-foot switch. The suction pump can be used as a general soldering iron. It is an essential tool for the electronic professionals as well as hobbysts.

Instructions:
1. It uses 220V 50Hz power supply with 30W power;
2. Turn on the power, preheating for 3-5 minutes;
3. Push down the piston handle, point the tin suction nozzle at the soldering part; after solder has melted, press the control button, the solder is sucked into the cylinder;
4. Tin suction device is equipped with two different diameter suction nozzles, depending on the thickness of the component lead;
5. When soldering, the same operation as the soldering iron;
6. When disassembling the cylinder, press down the top of the cylinder according to the direction of the arrow, pull the cylinder and the handle apart at the same time, and the cylinder can be separated out; when disassembling the suction nozzle, spin it counterclockwise and remove it.

Thank you for watching my video. Please like, share and subscribe my channel.

#RGInnovations

#DIY | #Techtalk | #Unboxing | #Review | #Lifehack

Видео 220V 30W Desoldering Suction Pump : Product Review (Hindi) канала RG Innovations