How to finish a bead loom project without cutting off its strings - faster version

This is a faster version of our existing video “How to finish a bead loom project without cutting off its strings”. Please click on the link below for the full normal speed version.

https://youtu.be/vT_gwU_c1-w

How to finish a basic beading loom project without cutting off its strings.

Materials and tools necessary to make the beaded part:
1) I used the Giant Peak Dale loom. This loom measures 300mm by 150mm (will take up to 86 warp threads)
2) Nymo thread size D – colour white
3) Miyuki Delica beads – colours: brown, blue, red, orange and gold.
4) Scissors
5) Beading needle
6) Masking tape
7) Cement glue

Instructions:
Please note this technique can be used on even or odd strand counts. You can only use this method if you have used the same continuous thread in your entire project. It will be impossible to pull the thread through if you make any amend/ knot or add thread to the project. That’s why this technique is recommended for smaller bead loom projects, because usually bigger ones need additional thread so please be aware of that. For more images of beaded work off the loom, please visit our website https://angablue.com/freetutorials/

Thanks for watching us.

Видео How to finish a bead loom project without cutting off its strings - faster version канала Angablue®