Bent Bicyclist's Wrench Multitool Restoration - Restoring Rusty Tools

I will restore this cool wrench multitool designed for bicyclists. It acts also as a tyre tool for removing the tyre of the bicycle. It is jammed and bent. Also the rust makes it very bad to use as a tyre tool because it will damage the wheels. After polishing it will slip between the wheel and tyre a lot easier.

To disassemble the wrench I could have drilled out the pin and then removed the wheel and the lower jaw. But I didn't see any advantage in that compared to the method used. My method was much easier and less likely to cause permanent damage.

After the disassembly I left the parts overnight in rust remover. After this I washed the parts in water. In my old videos I do it with the rust remover but using water will let me use the same rust remover longer.

After the rust was gone I decided to fix the bent shaft. I heated the shaft from the bent area and bent it back while the wrench was in a vise. However this ruined whatever hardening there ever was. Before I could harden the tool I needed to file all the pits and sand it because it would be much more work after the steel is hardened.

After everything was filed I used the furnace I made from a bucket to heat the shaft and hardened it in oil. Forge would be better but I only have a furnace and it seems to work. although it's not optimal because it a little awkward to put items in there.

I didn't want to heat the whole piece with lower jaw and the wheel just to make sure I don't cause any unnecessary damage. After all I only needed to harden the jaw. So I used a small torch to heat the jaw and hardened it in oil as well. After the parts were hardened I started polishing them.

After polishing I used an airbrush to paint the middle of the handle of the wrench. This allowed me to make a fade at the end of the tool rather than a hard edge. This was optimal because there was not a good point to put the hard edge to. Also it's a something I've not seen on tools and it compliments the way the handle turns into a tyre tool. I wasn't sure if it would look good but I think it looks great, especially with the red color and polished metal. Thanks for watching. Please let me know what do you think about it!

A free way to support my channel is access amazon/ebay to do your regular shopping through these links. I will get a small fee from each product bought on amazon after clicking these links, whether it was the linked product or a different one.

--------------------------------------------------------------------

Patreon: https://www.patreon.com/oddtinkering
T-Shirts: https://teespring.com/stores/odd-tinkering-2
Instagram: https://www.instagram.com/odd.tinkering/

Some of my tools:
ROTARY TOOL: https://amzn.to/2WF75I6
RUST REMOVER: https://www.mc-51thebestrustremover.com/?ref=YbUD-0E4NKfV
PRESS FOR ROTARY TOOL: https://amzn.to/2Uiv1Eu
2-AXIS TABLE FOR THE PRESS https://amzn.to/2WPkttl
POLISHING KIT: https://amzn.to/31w983l
NICKEL ANODE: https://amzn.to/2J62kTy
NICKEL PLATING SOLUTION: https://amzn.to/2oW0qOk
CHUCK NORRIS’ TOOTHBRUSH: https://amzn.to/2YfXUj2
CORDLESS DRILL: https://amzn.to/2Wois77

My filming gear:
MAIN CAMERA: https://amzn.to/2JvtKox
MAIN TRIPOD: https://amzn.to/2OlpYgn
MICROPHONE: https://amzn.to/2I80iDz
VIDEO LIGHTS: https://amzn.to/2FpJDaB
MAIN LENS: https://amzn.to/2Fm8yMk
CINEMATIC LENS: https://amzn.to/2TmNdHH
WIDE ANGLE LENS: https://amzn.to/2U7iJha
GOPRO: https://amzn.to/2U3eqU3
---------------------------------------------------------------------
SUBSCRIBE ▶▶▶ https://www.youtube.com/channel/UCf_s...
---------------------------------------------------------------------

Restoration playlist▶ https://www.youtube.com/playlist?list...

---------------------------------------------------------------------

Видео Bent Bicyclist's Wrench Multitool Restoration - Restoring Rusty Tools канала Odd Tinkering