[HD 1080p] How to Re Tape Bike Handlebars in Under 4 Minutes

How to re-tape bike handlebars, shot on a very old 1980s-era junker bike. The tape job is not perfect but was more than adequate for me. Simply start wrapping at the bottom of the bars, overlap by 1/3 of the previous wrap, and keep the forward angle at about 30 degrees. As long as you keep the tape taught through each angle, figure-8 the brake bosses, and tape off the end with regular electrical tape (not duct tape but the $2.50 black stuff) you should be all set in a very short time.

Camera: Nikon D7000
Lens: Nikkor AF-S 35mm f/.8G

Tools:

Tape & End Caps: $7.00, Amazon
Electrical Tape: $2.50, Target
Scissors
White Lightening Degreaser
Paper Towels

Видео [HD 1080p] How to Re Tape Bike Handlebars in Under 4 Minutes канала Oliver Porter