Big Tree Tech SKR 2 - Install - Marlin Configuration - Chris's Basement
We're back.......
We're back with Big Tree Tech's SKR 2 mainboard. Today we discuss some of the problems BTT had with the SKR 2, do a deep dive into past boards along with a step by step install and configuration.
00:00 Introduction
02:05 Good Board / Bad Board
03:51 SKR Comparison
08:06 SKR 2 Features
10:28 Driver Install
14:16 Board Install
19:49 Marlin Configuration
44:02 Test Print
45:03 Conclusion
These are affiliate links and take you to Amazon.
------------------------------------------------------
BTT SKR2 Board on Amazon:
https://geni.us/8035
------------------------------------------------------
Helpful Links:
🔗🔗🔗🔗🔗🔗🔗
Link to BTT SKR2 return info:
https://docs.google.com/document/d/1IeKgfE2WIDjqH1fx5Yg7n1FOHVwhDFmDlZ-7QMlOEV0/edit
Link to BTT fix info:
https://docs.google.com/document/d/1swmc4HvP9vxrxV2b9LVGa_I7GLTQGogQns7CfMYCckA/edit
Helpful Videos:
🎞🎞🎞🎞🎞🎞🎞
VS Code setup:
https://youtu.be/JWUcnkjeNU8
All Things Z:
https://youtu.be/3jAFQdTk8iw
Linear Advance:
https://youtu.be/V-bKfYF3I-o
Marlin Filament Sensor:
https://youtu.be/tl4VZ4zlxFQ
My Marlin config:
https://drive.google.com/drive/folders/14LZDneyUgVcU_gaKdHiiLqp72jzwTfYq?usp=sharing
PID tuning:
https://youtu.be/SHvckkGxYKY?t=2149
Auto level and babystepping:
https://youtu.be/iwhbeD2AduA
Link to reworked case:
https://www.thingiverse.com/thing:5019612
SUPPORT THE CHANNEL BY CLICKING THESE LINKS!
OpenBuilds - Great CNC and 3D Printer Parts (aff)
https://openbuildspartstore.com/?ref=J_MTw1gGRuWps
Slice Engineering - Mosquito Hotends (aff)
https://www.sliceengineering.com/?p=ryaN5ML9B
Wham Bam Systems Flexible Beds (aff)
http://bit.ly/2HoS1cV
Amazon (aff) [US DE GB CA IT ES FR JP]:
https://www.amazon.com/?tag=chrisbasement-20
Banggood(aff) https://ban.ggood.vip/7vm3
Aliexpress(aff) http://s.click.aliexpress.com/e/UrRbCm8
Buy me a coffee to keep me going!
https://buymeacoff.ee/Wc0DouFbl
You can support my work on Patreon
https://www.patreon.com/brotherchris
One Time Tips, You Can PayPal Me:
https://www.paypal.me/ChrisBasement
----------------------------------------------
Find Me Over On Twitter!
----------------------------------------------
Twitter : http://twitter.com/ChrisRiley3D
FTC Disclaimer: A percentage of sales is made through Affiliate links
As an Amazon Associate I earn from qualifying purchases.
Видео Big Tree Tech SKR 2 - Install - Marlin Configuration - Chris's Basement канала Chris Riley
We're back with Big Tree Tech's SKR 2 mainboard. Today we discuss some of the problems BTT had with the SKR 2, do a deep dive into past boards along with a step by step install and configuration.
00:00 Introduction
02:05 Good Board / Bad Board
03:51 SKR Comparison
08:06 SKR 2 Features
10:28 Driver Install
14:16 Board Install
19:49 Marlin Configuration
44:02 Test Print
45:03 Conclusion
These are affiliate links and take you to Amazon.
------------------------------------------------------
BTT SKR2 Board on Amazon:
https://geni.us/8035
------------------------------------------------------
Helpful Links:
🔗🔗🔗🔗🔗🔗🔗
Link to BTT SKR2 return info:
https://docs.google.com/document/d/1IeKgfE2WIDjqH1fx5Yg7n1FOHVwhDFmDlZ-7QMlOEV0/edit
Link to BTT fix info:
https://docs.google.com/document/d/1swmc4HvP9vxrxV2b9LVGa_I7GLTQGogQns7CfMYCckA/edit
Helpful Videos:
🎞🎞🎞🎞🎞🎞🎞
VS Code setup:
https://youtu.be/JWUcnkjeNU8
All Things Z:
https://youtu.be/3jAFQdTk8iw
Linear Advance:
https://youtu.be/V-bKfYF3I-o
Marlin Filament Sensor:
https://youtu.be/tl4VZ4zlxFQ
My Marlin config:
https://drive.google.com/drive/folders/14LZDneyUgVcU_gaKdHiiLqp72jzwTfYq?usp=sharing
PID tuning:
https://youtu.be/SHvckkGxYKY?t=2149
Auto level and babystepping:
https://youtu.be/iwhbeD2AduA
Link to reworked case:
https://www.thingiverse.com/thing:5019612
SUPPORT THE CHANNEL BY CLICKING THESE LINKS!
OpenBuilds - Great CNC and 3D Printer Parts (aff)
https://openbuildspartstore.com/?ref=J_MTw1gGRuWps
Slice Engineering - Mosquito Hotends (aff)
https://www.sliceengineering.com/?p=ryaN5ML9B
Wham Bam Systems Flexible Beds (aff)
http://bit.ly/2HoS1cV
Amazon (aff) [US DE GB CA IT ES FR JP]:
https://www.amazon.com/?tag=chrisbasement-20
Banggood(aff) https://ban.ggood.vip/7vm3
Aliexpress(aff) http://s.click.aliexpress.com/e/UrRbCm8
Buy me a coffee to keep me going!
https://buymeacoff.ee/Wc0DouFbl
You can support my work on Patreon
https://www.patreon.com/brotherchris
One Time Tips, You Can PayPal Me:
https://www.paypal.me/ChrisBasement
----------------------------------------------
Find Me Over On Twitter!
----------------------------------------------
Twitter : http://twitter.com/ChrisRiley3D
FTC Disclaimer: A percentage of sales is made through Affiliate links
As an Amazon Associate I earn from qualifying purchases.
Видео Big Tree Tech SKR 2 - Install - Marlin Configuration - Chris's Basement канала Chris Riley
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
BigTreeTech - Smart Filament Sensor - Chris's BasementBTT SKR2 - BTT TFT display setup on SKR V2 (Rev B)SKR2 TMC2209 Bug! | Don't Destroy Your Step Sticks!BigTreeTech SKR2 - First LookArc Welder - Octoprint Plugin To Help Your Prints - Set Up & Test - Chris's BasementSKRv2 - How to install firmware on STM32F429Updated Marlin firmware setup guide - VS Code and Auto Build MarlinNUEVA SKR2 Rev B BigtreetechHow To Install SKR2 | Wiring & Compile Firmware | Ender 3 Pro Build Series EP53 ways to add a dual Z axis - Including G34 auto Z levellingBTT SKR2 - Extruder and cooling fan automationBigTreeTech - SKR Mini E3 v3.0 - Chris's BasementBig Tree Tech 7" Touchscreen TFT70 V3.0 - Super Cool - Chris's BasementPower Loss Recovery - BTT UPS Module - Chris's BasementFula-Bed - Fulament - 3D Printer Bed Upgrade - Chris's BasementTMC2209 Stepper Drivers - Bigtreetech - SKR 1.3 - Install - Chris's BasementUPGRADE Plug & Play BOARDS - Creality ENDER 3 / PROBTT SKR2 - TMC2209 UART with Sensorless HomingMARLIN - Essential Guide To Start Editing Your Own FIRMWARE