DIY 500ml Bottle Filling and Capping Machine Using Arduino & Flow Sensor

$2/5pcs 4Layer & 2Layer PCBs, get $54 coupons here: https://jlcpcb.com/CYT

Join JLCPCB 3D Printing Lovers Group:
https://www.facebook.com/groups/3dprintinglover/
NOTE: You can also order 3D printed parts of this project at JLCPCB by uploading stl files.

Join JLCPCB Official user group:
https://www.facebook.com/groups/JLCPCB
Good News!
Now you can order me to design a custom PCB for you! (not physical PCB. only gerber files)
Facebook:
https://goo.gl/rUxA5C
List of Materials:
(Affiliate Links)

Arduino NANO:
https://www.banggood.com/custlink/mKKd687Vaz
Water Pump:
https://www.banggood.com/custlink/3KKvZ5ISin
Gear Remover:
https://www.banggood.com/custlink/KGKDStiZjS
8mm Shaft:
https://www.banggood.com/custlink/KvKRHs3AWm
https://www.banggood.com/custlink/GmGmZHS9Oa
Stepper Motor:
https://www.banggood.com/custlink/3vDv8VSSOz
Zip Ties:
https://www.banggood.com/custlink/K3vD9t9SLw
Stepper Motor Driver:
https://www.banggood.com/custlink/3K3DIH9iBY
20x4 LCD:
https://www.banggood.com/custlink/m3mhVbDNWi
Transister bc547:
https://www.banggood.com/custlink/KK3d5nGQpP
5V Buzzer:
https://www.banggood.com/custlink/vvvDStIZBe
LM7805CV:
https://www.banggood.com/custlink/DvGGItiSB2
DC Jack:
https://www.banggood.com/custlink/mmKm9P9IQt
DC Pin:
https://www.banggood.com/custlink/DKm3iV8SNS
Terminal Blocks:
https://www.banggood.com/custlink/3KGv85i8AO
Tactile Button:
https://www.banggood.com/custlink/Gv3KI58ln0
Male Female Header Pins:
https://www.banggood.com/custlink/3Dv39VZoN2
Jumper Wires:
https://www.banggood.com/custlink/3DGG9PIjn1
Heat Sink:
https://www.banggood.com/custlink/D3DKIHZjzz
Spacers:
https://www.banggood.com/custlink/3GKvSH9l7d
Air Pump + Valve:
https://www.banggood.com/custlink/G3KdBSfH6y
Sanding Drum:
https://www.banggood.com/custlink/K3mJdDuzob
Sliding Bearing Blocks 8mm:
https://www.banggood.com/custlink/3GvCRD1zMY
Shaft + Threaded rod + Brackets:
https://www.banggood.com/custlink/K33Whv1qkc
Micro Servo:
https://www.banggood.com/custlink/KDvWYK7M2i
Flow Sensor:
https://www.banggood.com/custlink/DKvv6kiQwB
Solinoid Valve:
https://www.banggood.com/custlink/3vDG4z8b7Q
PCB Gerber Files, STL Files & Arduino Code:
You Can Buy here for only a few $: https://goo.gl/rUxA5C

3D Printer & Filaments:

Get ENDER 3-PRO Printer at 30% Off here: https://www.banggood.com/custlink/KDKDb1MgOs
23% off on Filament here: https://www.banggood.com/custlink/KGmGATze6G
BGender04 US$195

IMPORTANT:
Ask your customs department for restrictions and taxes on 3D Printer before ordering it.
Note: Do not use this project for selling or re-uploading on any social site. only for personal use.
Also buy materials from given affiliate links. it will give me a little commission. Thanks
TOOLS:
Microphone:
https://www.banggood.com/custlink/KDDE6iuHeD
Tripod: https://www.banggood.com/custlink/DmKRVbGQra
Soldering Iron: https://www.banggood.com/custlink/3KDY6ITPof
Soldering Paste： https://goo.gl/16xrgn
Third Hand Tool: https://goo.gl/5vCAiu
Multimeter :https://goo.gl/WxwQ2J
Battery % meter: https://www.banggood.com/custlink/GDvmpkttEt
https://www.banggood.com/custlink/3K3Kcq5FEO
Green Mat: https://www.banggood.com/custlink/KKmKeWhIca
Like Us On Facebook:
https://goo.gl/rUxA5C
SUBSCRIBE HERE:
https://goo.gl/2Epk4x

Видео DIY 500ml Bottle Filling and Capping Machine Using Arduino & Flow Sensor канала Easy HomeMade Projects