Unboxing: LILYGO T5 4.7" E-paper ESP32 16MB FLASH 8MB PSRAM
LilyGo EPD47
Specs:
-ESP32-WROVER-E (ESP32-D0WDQ6 V3)
-16MB FLASH
-PSRAM 8MB
-USB to TTL CP2104
- 4.7 inches, 540(H)X960(V) resolution, 16 Gray Level ED047C1, and supports partial refresh.
-960X540 resolution 8-bit parallel port 4.7 inch ink screen
-4pin 2.0 molex 4 p 53015-0410 X3
-RST button X1
-Custom button X4
-TYPE-C
-Battery holder PH 2.0 pitch
-18650 battery metal connector
-6pin FPC touch screen expansion connector
-Battery charge and discharge protection chip
-USB input power 5V@1A
-4pin expansion interface output is 3.3V
-Sleep mode current@~170uA
Aliexpress item:
https://www.aliexpress.com/item/1005001844173025.html
Source code:
https://github.com/Xinyuan-LilyGO/LilyGo-EPD47
Follow me:
https://twitter.com/hpsaturn
Github:
https://github.com/hpsaturn
About me:
https://hpsaturn.com/
Видео Unboxing: LILYGO T5 4.7" E-paper ESP32 16MB FLASH 8MB PSRAM канала Hpsaturn
Specs:
-ESP32-WROVER-E (ESP32-D0WDQ6 V3)
-16MB FLASH
-PSRAM 8MB
-USB to TTL CP2104
- 4.7 inches, 540(H)X960(V) resolution, 16 Gray Level ED047C1, and supports partial refresh.
-960X540 resolution 8-bit parallel port 4.7 inch ink screen
-4pin 2.0 molex 4 p 53015-0410 X3
-RST button X1
-Custom button X4
-TYPE-C
-Battery holder PH 2.0 pitch
-18650 battery metal connector
-6pin FPC touch screen expansion connector
-Battery charge and discharge protection chip
-USB input power 5V@1A
-4pin expansion interface output is 3.3V
-Sleep mode current@~170uA
Aliexpress item:
https://www.aliexpress.com/item/1005001844173025.html
Source code:
https://github.com/Xinyuan-LilyGO/LilyGo-EPD47
Follow me:
https://twitter.com/hpsaturn
Github:
https://github.com/hpsaturn
About me:
https://hpsaturn.com/
Видео Unboxing: LILYGO T5 4.7" E-paper ESP32 16MB FLASH 8MB PSRAM канала Hpsaturn
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Ili9341 LCD 60fpsESP32 E-Paper Display for Auto Rotating Picture FrameAssembly: Docking station for LilyGo 4,7 (18650 and PH2.0 holder versions)LILYGO T5-4.7 inch E-paper ESP32 V3 version 16MB FLASH 8MB PSRAM WIFI/Bluetooth for arduinoThe best low power display? E-Paper TutorialM5Stack Core2 Best ESP32 development board system.E-paper hacking: fastest possible refresh rateLilygo T5 4.7 inch E-paper - ESP32 V3 - IOT weather stationReview of Waveshare e-paper displays for raspberry pi / Making an e-paper etch-a-sketch cloneThe M5 Paper - A Game Changer! (First Look With Teardown!)Arduino Tutorial: E-Paper DisplayHow to Cause Trouble with the LilyGo TTGO ESP32 Smartwatch#201 New ESP32 Boards with DisplaysESP32 CanAirIO loader via OTG cable - No PC - No drivers!Introducing M5Paper - Touch Enabled ESP32 E-ink deviceTech Note 091 - ESP32 and 2.9" e-Paper for a Weather Display (low power)M5Paperで2020年から2021年の年越しをしてみました。M5Stack ESP32 Core Ink unboxing#365 Is Power over Ethernet (POE) on the ESP32 any good? (New TTGO and Olimex boards available)Introduction to ESP32 - Getting Started