How to NavSpark RTK GPS setup (NS-HP) and test with Pixhawk
**** [ Modification in this video ] *****
For normal RTK application, 1Hz base can work with 1 / 2 / 4 / 5 / 8 / 10 Hz rover. Only for moving base RTK mode the base is required to operate at same update rate as the rover.
It's winter now , too cold to test outside.
Later I will upload RTL test video.
Видео How to NavSpark RTK GPS setup (NS-HP) and test with Pixhawk канала Singya Drone
For normal RTK application, 1Hz base can work with 1 / 2 / 4 / 5 / 8 / 10 Hz rover. Only for moving base RTK mode the base is required to operate at same update rate as the rover.
It's winter now , too cold to test outside.
Later I will upload RTL test video.
Видео How to NavSpark RTK GPS setup (NS-HP) and test with Pixhawk канала Singya Drone
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Track Robot Pixhawk RTK GPS RC Radio and Telemetry Connections Closer LookHow RTK worksNeo-M8P RTK setup and demo (courtesy u-blox)ZED-F9P Base and Rover ConfigurationHow to make an RTK base from ZED F9D boardRTK with Mission Planner[팰콘샵] 드론 제작 가이드 2-2편 - 픽스호크 셋팅에서 비행까지 완벽 따라하기u-blox M8P RTK test on multi-rotorInto The Dirt At 180mph - AVA's first HPR FlightArduPilot Rover Motor Direction Test and DeadZone CompensationRTK GPS - Sowing fertilizer with my £400 GPS.Lawn Sweeper Track Robot Uses RTK GPS with Pixhawk Autopilot and Ardupilot Mission Planner RoverExperiments with the Ublox F9P RTK GPSWhat is Real-Time Kinematic (RTK) and how does it work?Reach: affordable RTK GPSMake A Raspberry Pi Pixhawk Smart Rover In 22 Minutes!Modern PixHawk Telemetry Radios: Options for telemetry and setup tipsArduRover 4.1.0-Dev Moving Base Config (GPS for Yaw) using UART2 for RTCM3 CorrectionsDIY drone (Part One) | S500 | Pixhawk | FPV Quadcopter |Setting up a RTK Rover and connect it to a Base Station.