How to make a Infrared Panel from conductive ink

Here I show how to make a Infrared panel out from conductive ink.

For this project we use a aluminium plate in size 50x12x0.2cm for the base element. For the temperature insulator we use a thermo foam and for the electrodes a aluminium tape. For the end we coat the top surface of the panel with conductive ink and also we add a glass fibers.
The resistance of the panel need to be around 10 ohms for the operation voltage of 24 to 30 volts.

!!! Also add some themperature thermostat for the temperature limitation!!!
We are not responsible for your actions!

The conductive ink you can buy here (Water Based CP 600-1): https://www.nemo-conductive.com
We support and connect all kinds of makers, therefore with sharing your projects (short description or a picture) in the blog we offer you 10% discount on your next purchase through our online shop. Let your ideas inspire others.
See also another tests that is made from this conductive ink:

- Carbon conductive ink - pilot production: https://www.youtube.com/watch?v=OEg95uhy8lo&feature=youtu.be

- Paper battery: https://www.youtube.com/watch?v=zVdmn14x5QY
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SUPPORT: HELP ME TO MAKE MORE INTERESTING VIDEOS

You can make more videos possible with some Patteron donations: https://www.patreon.com/cayrex2

or

One time donation: https://www.paypal.com/si/cgi-bin/web...
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Видео How to make a Infrared Panel from conductive ink канала cayrex2