AWESOME 3D PRINTED EXOSKELETON HANDS!!!
Hey, just a friendly reminder to follow me, it's the best way to support my channel: https://www.youtube.com/user/RcLifeOnSimon
I printed all the parts in blue, grey and black PLA filament and it held up surprisingly well! I would like to use nylon next time for long term toughness, but the performance was still smashing! I 3D printed almost all parts on the CR-10S which did a great job as always. For the assembly you are required 80 screws and 80 washers, I went with 2.5mm 12mm length screws with some M4 washers (4mm inner and 12mm outer) and that worked perfectly! All the parts popped in place, only minor sanding necessary, and the exoskeleton turned out looking madness! 3DPrintIt came up with a fantastic design and it even held up to some quite severe abuse. Smashing soda cans and even the 3D printed Terminator head, I only received scratches at the end of it.
THe CR-10 3D printer is $390 right now: https://goo.gl/bJFYTB
Exoskeleton STL files: https://www.thingiverse.com/thing:892654
3DPrintIt's YouTube channel: https://goo.gl/frqcEg
If you would like to get daily updates of my work you can check out my Patreon page: https://www.patreon.com/rclifeon
Music:
Joakim Karud - No Worries (feat. Dyalla)
Dj Quads - Missing Someone
Veorra & The Tech Thieves - Ghost Town
Видео AWESOME 3D PRINTED EXOSKELETON HANDS!!! канала RCLifeOn
I printed all the parts in blue, grey and black PLA filament and it held up surprisingly well! I would like to use nylon next time for long term toughness, but the performance was still smashing! I 3D printed almost all parts on the CR-10S which did a great job as always. For the assembly you are required 80 screws and 80 washers, I went with 2.5mm 12mm length screws with some M4 washers (4mm inner and 12mm outer) and that worked perfectly! All the parts popped in place, only minor sanding necessary, and the exoskeleton turned out looking madness! 3DPrintIt came up with a fantastic design and it even held up to some quite severe abuse. Smashing soda cans and even the 3D printed Terminator head, I only received scratches at the end of it.
THe CR-10 3D printer is $390 right now: https://goo.gl/bJFYTB
Exoskeleton STL files: https://www.thingiverse.com/thing:892654
3DPrintIt's YouTube channel: https://goo.gl/frqcEg
If you would like to get daily updates of my work you can check out my Patreon page: https://www.patreon.com/rclifeon
Music:
Joakim Karud - No Worries (feat. Dyalla)
Dj Quads - Missing Someone
Veorra & The Tech Thieves - Ghost Town
Видео AWESOME 3D PRINTED EXOSKELETON HANDS!!! канала RCLifeOn
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
The Machine That Erases What It CreatesAdam Savage's New Mechanical Claws!Fun and useful gadgets made with 3D printingAwesome 3D Printed Flexible ShoesDRIVING A Hydroplaning RC CAR On WATER!MECHANICAL CLAWS - UNUSUALHow bad is a $95 3D Printer??3D Printed Vectoring Mechanism10 Awesome and Practical 3D Prints!How I 3D Printed My Identical TwinTen Awesome 3D-Printable Gifts3D Printed Racing Drone - Will It Survive?Creality Ender 3 Full Review - Best $200 3D Printer!3D Printer Makes the Perfect Chocolate Layer$2 Phone Case Made on $1000 3D PrinterTop 10 3D Printable Tools Every Maker Should, Like, MakeTINY 3D Printed Hovercraft5 Cool 3D Printed MechanismsHow This 7000W Motor Was NOT Powerful Enough!