Adafruit CLUE running MicroPython code from Kitronik's Inventor's Kit using an emulation library

An Adafruit CLUE board used with the Kitronik Inventor's Kit where a BBC micro:bit would normally be used. A microbit emulation library written in CircuitPython emulates the 5x5 LED display and allows the MicroPython code to run as-is using CircuitPython. The library has a few different view modes. The full-screen "text" one is shown first, then it switches to "enhanced" mode which shows the pin states as they are read from and written to.

Experiment 3 has a button connected to pin0, a linear potentiometer connected to P1 and a standard red LED with 47k resistor on pin2 driven by a pulse-width modulation (PWM) 3.3V output.

Instructables article: https://www.instructables.com/Using-the-Kitronik-Inventors-Kit-With-the-Adafruit/

Library source code: https://github.com/kevinjwalters/CircuitPython_MicrobitLibEmu and https://github.com/kevinjwalters/CircuitPython_DisplayPin

Music in the background is Mystic Force - Symphonik - https://www.youtube.com/watch?v=0NWwEAJWT-8

Видео Adafruit CLUE running MicroPython code from Kitronik's Inventor's Kit using an emulation library канала Kevin Walters