Hyundai i30, Elantra GT oil catch can.

2.0L NU engine oil catch can install. Parts, 500mm 3/8ID fuel hose, a Compressor oil/water separator, 2 x hose fittings minimum ID of 6mm to fit separator and the 3/8 hose. 2 x stainless steel hose clamps to fit 20mm, Teflon tap to seal fittings.

Use the OEM pipe for the exit side of the separator and the original hose clamps.

IMPORTANT ***The bronze filter in the separator has four 5mm holes drilled in it to keep flow at OEM design spec. This also enables the retention of the baffle.

Видео Hyundai i30, Elantra GT oil catch can. канала James Grant