Making a Craft Room
I have been converting an unfinished room in our basement into a craft room. I had previously torn off all of the wall paneling and ceiling in this room leaving it as just bare studs. In finishing this room, I built a soffit around some ducts that are in the ceiling and I put in new electrical outlets and lighting. I then covered the ceiling with ¼” plywood and the walls with ½” plywood. This was then painted white to make a very bright space. Lastly, I made a French cleat system on the walls to hold our new workstations and storage systems for the craft room.
Tools used in this project can be found at
http://www.frankmakes.com/
CNC: http://www.cncrouterparts.com
Plywood Panel Lift: https://youtu.be/bcnn3sIf9rI
To see upcoming projects follow me on social media
Patreon
https://www.patreon.com/user?u=16151185
Instagram
https://instagram.com/frank.howarth/
Twitter
https://twitter.com/FrankHowarth
Facebook
https://www.facebook.com/FrankMakes
Видео Making a Craft Room канала frank howarth
Tools used in this project can be found at
http://www.frankmakes.com/
CNC: http://www.cncrouterparts.com
Plywood Panel Lift: https://youtu.be/bcnn3sIf9rI
To see upcoming projects follow me on social media
Patreon
https://www.patreon.com/user?u=16151185
https://instagram.com/frank.howarth/
https://twitter.com/FrankHowarth
https://www.facebook.com/FrankMakes
Видео Making a Craft Room канала frank howarth
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Making a Dead Blow Mallet with a Brass HandleHow To Make a Giant Built-In Cabinet || Built-In Cabinet TutorialDIY Shed to Workshop Conversion | Ep. 1 Modern BuildsWoodturning the EyeNo Welding Required! Building a 10 FOOT LONG Plywood Bench w/ Veneer and Steel Dividers - Walrus OilQuill handwheel - MACHININGMachinist's Tool Chest Made From Scrap PalletsAdam Savage's One Day Builds: Micrometer Gauge Box Set!1900s Door Mortiser [Restoration]Modern Console Table // Floating Console Table // Console Table How ToUsing a TAP as Thread Boring ToolFrankenvac 2.0Shoe Storage Bench // Built In BenchRestoring Old Rusty Table Fan with Laser CleaningMaking a Tensegrity Table that Actually works!Fixing an old 1940’s Drill PressI made a WOOD HOT TUB out of 2x6sBent Wood Table // Bent Lamination // How to Bend Wood6 Nail Gun Mistakes You Should Avoid | Brad Nailer TipsMaking Our Dining Table