Manometer, Throttle, Bodies, Carbs, Balancer, balancing carburettors, throttle, synchronization
This is my (Alan of Spofforth) home made manometer, cost 5GBP or around 8USD and takes 20 mins to make. Inspiration for this came from seeing posts on various BMW user forums. It is used to balance and or synchronize the throttle bodies or carbs of any twin cylinder motorcycle. Liquid is 2 stroke oil. plastic tube is 6mm diameter and 10 meters long. In use the pipes should go up to the highest point possible and then back down to the throttle body. I will post another video of the Manometer in use.
Видео Manometer, Throttle, Bodies, Carbs, Balancer, balancing carburettors, throttle, synchronization канала Phoebelala
Видео Manometer, Throttle, Bodies, Carbs, Balancer, balancing carburettors, throttle, synchronization канала Phoebelala
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Lego NXT fish feederNXT clock chain clock running from external power supplybaz asquith cessna 337 electric conversionIOS 8.3 problem ipad2E0VZZ first steps into morse codefirst KX3 operations on 10 watts,1275 enginedownhill to LofthousemontejaqueMitchell B25 HC model Century ukacrowot aircraft Inverted landing in the snowAl does slomo in IcelandAutomatic mast with 6m contest yagi, 2 sections elevatedAerotow at Nidderdale Model Flying clubCIMG4853quadcopter flying in Spofforth North YorkshireYaesu G 450c rotator driving a pneumatic mast via a DIY couplinglightning strike 2011 hi defbaz asquith spitfire emergency landingM6OXP first HF QSOIMG 6161