Загрузка страницы

DIY LED Sign - Logo With Backlit Lights

In this video I briefly show how I made a backlit LED sign. This is a unique option for a logo sign. This was done with walnut veneer plywood, RGB LED lights with a tunable white. All the materials were cut on the CNC Router and the tape light was installed on the back side of the pieces and then wired and soldered into the system. I used a LED controller and driver to power and control the lights.

Видео DIY LED Sign - Logo With Backlit Lights канала James Wesley Furniture
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
31 января 2022 г. 18:45:00
00:05:31
Яндекс.Метрика