Building APRS Digipeater IGate with RTL-SDR and Baofeng Radio

Link to the setup video:
https://www.youtube.com/watch?v=g_AoAGjQMl8

You can buy the Baofeng radio used here:
https://amzn.to/39rXUm2

You can buy the Raspi Kit here:
https://amzn.to/30BcJi0

You can buy the RTLSDR kit here:
https://amzn.to/3fXnxNM
Link to the power point:
https://themodernham.com/downloads/

In this video, I'm taking my raspberrypi, an rtl-sdr and a baofeng f8-hp and creating an APRS Digipeater and igate for packet radio.
This was a very budget setup, but there are no systems in place in my local area, so I will be running this for the time being.
The video above details the mateirals, and software setup, but I'm using Direwolf for the TNC, and interfacing the Baofeng with an audio cable
straight into the radio. Not the best setup, but it will get the job done.

This track is licensed under a Creative Commons Attribution 4.0 International License. You can find more info about this license here: https://creativecommons.org/licenses/by/4.0/
Make sure to check out my blog, and shop over at:
https://themodernham.com .
⚡ Join the ModernHams Discord: ⚡
https://discord.gg/EbP9dTMrTU
➡️Join this channel to get access to perks⬅️
https://www.youtube.com/channel/UCOe0_RzGUDm73XNtRozPfMw/join

Видео Building APRS Digipeater IGate with RTL-SDR and Baofeng Radio канала ModernHam