Honda CBR250R MC19 Part 49 - Running The Engine
Our nice new exhaust paint wont harden until its been heated up thoroughly. Until then it will be soft and easily scratched or damaged. This is a common theme with high temperature paints, they need to be baked on. The best way to do this is to run the engine.
Our project is progressing really well and the end is in sight, though still way off in the distance. Before we start attaching cosmetic items such as fairing its time to make sure the machine is mechanically sorted.
Видео Honda CBR250R MC19 Part 49 - Running The Engine канала High Octane Commuting
Our project is progressing really well and the end is in sight, though still way off in the distance. Before we start attaching cosmetic items such as fairing its time to make sure the machine is mechanically sorted.
Видео Honda CBR250R MC19 Part 49 - Running The Engine канала High Octane Commuting
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Honda CBR250R MC19 Part 28 - Apply Top Coat and Clear Coat To Tank](https://i.ytimg.com/vi/wznCjKL05BE/default.jpg)
![Honda CB125E - Replace Drive Chain and Sprockets Part Three](https://i.ytimg.com/vi/3SqcWY-QCJg/default.jpg)
![Honda CBR250R MC19 Part 27 - The Final Coat of Primer On The Fuel Tank](https://i.ytimg.com/vi/KJ-jujID8-4/default.jpg)
![BOB (CB125E Engine rebuild) Part 2 - Installing New Gearbox Bearings](https://i.ytimg.com/vi/DQYmLek8kIQ/default.jpg)
![Honda CB125E - How To Remove and Install Piston and Cylinder Part 2](https://i.ytimg.com/vi/sWae_sNjTkA/default.jpg)
![How to Replace the Fuel Tap on a Honda CB125E](https://i.ytimg.com/vi/3KZ2xogbMIo/default.jpg)
![Rings and Things - How to Install Piston Rings](https://i.ytimg.com/vi/Ot5_9hH143I/default.jpg)
![Honda CBR250R MC19 - Introducing A New Project And Also Introducing the PPSR](https://i.ytimg.com/vi/xKKM-wYJG_0/default.jpg)
![Honda Spada Project Part 6 - Registration and First Run](https://i.ytimg.com/vi/ZFrcY7opbkk/default.jpg)
![BOB (CB125E Rebuild) Part 12 - How Do I Know If The Oil Pump is Working?](https://i.ytimg.com/vi/rTZudSCCclc/default.jpg)
![How to Change the Spark Plug on a Honda CB125E](https://i.ytimg.com/vi/TNltQWeNr_8/default.jpg)
![Honda CBR250R MC19 Part 35 - Inspecting The Front Wheel And Removing The Wheel Bearings](https://i.ytimg.com/vi/WqpnoNnouOM/default.jpg)
![BOB (CB125E Engine Rebuild) Part 9 - Checking the Cylinder Head](https://i.ytimg.com/vi/KXoyELsBnio/default.jpg)
![Honda NTV650 Revere Part 4 - Checking the Valve Timing](https://i.ytimg.com/vi/tUXT5bcvuPo/default.jpg)
![BOB (CB125E Engine Rebuild) Part 5 - Left Hand Crankcase Components](https://i.ytimg.com/vi/UAsnDw-Ch3c/default.jpg)
![Standard Honda CB125E on the dyno](https://i.ytimg.com/vi/p2yk2UqkOr8/default.jpg)
![Honda CBR250R MC19 Part 18 - Start Up!](https://i.ytimg.com/vi/uOndSELi-cA/default.jpg)
![Preparing and Fitting a New Battery - Honda Spada](https://i.ytimg.com/vi/1WOvsj40bVM/default.jpg)
![Honda CBR250R MC19 Part 40 - Removing The Exhaust System](https://i.ytimg.com/vi/cuHqzyGSdEE/default.jpg)
![Honda CBR250R MC19 Part 20 - Show Pony or Regular Ride? - Plus A Wash!](https://i.ytimg.com/vi/Uzp3uwZk1Ak/default.jpg)
![BOB (CB125E Engine Rebuild) Part 6 - Completing the Bottom End](https://i.ytimg.com/vi/L4s1rfPzWxY/default.jpg)