The Split-Shank Ring
This is my 6th video in the past month and a half! A new record for me.
Here's another metalsmithing project video for you! Learn how to make a split-shank ring. It's a great ring for adding a gemstone or two (or three). This project is also relatively easy and it only uses 12 gauge square wire! Lots of fabulous soldering practice too!
TOOLS USED IN THIS VIDEO
PepeTools
Best soldering pick, IMHO: PepeTool's Carbide Soldering Pick: https://pepetools.com/collections/soldering-joining/products/carbide-soldering-pick-with-staycool-aluminum-handle#?aff=5
Check out PepeTool's Bench Basics for the flux, mist applicator, Blade Butter, and more, that I use - https://pepetools.com/collections/bench-basics?aff=5https://pepetools.com/collections/bench-basics?aff=5
Large Soldering Block, that I use (the only way to go!), at Pepetools - https://pepetools.com/products/hardened-charcoal-soldering-block-compressed-european?aff=5
PepeTools Smart Pickle - https://pepetools.com/products/smart-pickle-for-non-ferrous-metals-3lb-jar-sodium-bisulfate?aff=5
PepeTools Smart Flux: https://pepetools.com/products/smart-flux-prips?aff=5
PepeTools Spray Mist Applicator: https://pepetools.com/products/fine-mist-spray-applicator-for-flux-10oz?aff=5
PepeTools Blade Butter: https://pepetools.com/products/blade-butter-cutting-lubricant-2oz-jar?aff=5
PepeTools Ring Bender: https://pepetools.com/products/superior-ring-bending-tool?aff=5
PepeTools Ring Clamp: https://pepetools.com/products/ring-clamp?aff=5
Knew Concepts Face Shield - Knew Concepts: Item #350.215
Knew Concepts Clamp for Face Shield - Knew Concepts: Item #350.120
Miter Cutting Vise & Jig - Amazon: https://amzn.to/3y2FyGj, Rio Grande: Item #: 113596
Keiba Flush Cutters (cuts up to 10 gauge). Amazon: https://amzn.to/3F52EOa, Rio Grande: Item: 111312
Moore's Sanding Disc - Amazon: https://amzn.to/3OKqpj7
Snap-on Mandrel for Moore's Sanding Discs - Amazon: https://amzn.to/381sGpg
MATERIALS USED IN THIS VIDEO
Only 12 gauge square, sterling silver wire - that's it!
I'm working on the stepped, square, bezel setting video. Hopefully, it will be out soon! Check back here or, better yet, subscribe so that you don't miss a thing!
MY VIDEO/WEBSITE LINKS
WEBSITE
Ring Charts: https://nancylthamilton.com/resources/charts/#Ring_Charts
Inside Ring Blank Measurements: https://nancylthamilton.com/resources/charts/inside-ring-blank-measurements-for-calculating-ring-blanks/
VIDEOS
Link to my Wrapped Ring Project: https://youtu.be/Y5k_4W6X7SU
Link to My Oxygen Concentrator Video: https://youtu.be/ExrK7_Lr7MQ
https://www.NancyLTHamilton.com
https://www.NancyLTHamiltonshop.com
Email: asknancylthamilton@gmail.com
Pinterest: https://www.pinterest.com/nancylthamilton/
Facebook: https://www.facebook.com/nancylthamiltonjewelry/
Instagram: @nancy.lt.hamilton
This page may have an affiliate link or two (or 20! ha!). By purchasing through these links, you are helping to support this channel. Thank you!
Видео The Split-Shank Ring канала Nancy Hamilton
Here's another metalsmithing project video for you! Learn how to make a split-shank ring. It's a great ring for adding a gemstone or two (or three). This project is also relatively easy and it only uses 12 gauge square wire! Lots of fabulous soldering practice too!
TOOLS USED IN THIS VIDEO
PepeTools
Best soldering pick, IMHO: PepeTool's Carbide Soldering Pick: https://pepetools.com/collections/soldering-joining/products/carbide-soldering-pick-with-staycool-aluminum-handle#?aff=5
Check out PepeTool's Bench Basics for the flux, mist applicator, Blade Butter, and more, that I use - https://pepetools.com/collections/bench-basics?aff=5https://pepetools.com/collections/bench-basics?aff=5
Large Soldering Block, that I use (the only way to go!), at Pepetools - https://pepetools.com/products/hardened-charcoal-soldering-block-compressed-european?aff=5
PepeTools Smart Pickle - https://pepetools.com/products/smart-pickle-for-non-ferrous-metals-3lb-jar-sodium-bisulfate?aff=5
PepeTools Smart Flux: https://pepetools.com/products/smart-flux-prips?aff=5
PepeTools Spray Mist Applicator: https://pepetools.com/products/fine-mist-spray-applicator-for-flux-10oz?aff=5
PepeTools Blade Butter: https://pepetools.com/products/blade-butter-cutting-lubricant-2oz-jar?aff=5
PepeTools Ring Bender: https://pepetools.com/products/superior-ring-bending-tool?aff=5
PepeTools Ring Clamp: https://pepetools.com/products/ring-clamp?aff=5
Knew Concepts Face Shield - Knew Concepts: Item #350.215
Knew Concepts Clamp for Face Shield - Knew Concepts: Item #350.120
Miter Cutting Vise & Jig - Amazon: https://amzn.to/3y2FyGj, Rio Grande: Item #: 113596
Keiba Flush Cutters (cuts up to 10 gauge). Amazon: https://amzn.to/3F52EOa, Rio Grande: Item: 111312
Moore's Sanding Disc - Amazon: https://amzn.to/3OKqpj7
Snap-on Mandrel for Moore's Sanding Discs - Amazon: https://amzn.to/381sGpg
MATERIALS USED IN THIS VIDEO
Only 12 gauge square, sterling silver wire - that's it!
I'm working on the stepped, square, bezel setting video. Hopefully, it will be out soon! Check back here or, better yet, subscribe so that you don't miss a thing!
MY VIDEO/WEBSITE LINKS
WEBSITE
Ring Charts: https://nancylthamilton.com/resources/charts/#Ring_Charts
Inside Ring Blank Measurements: https://nancylthamilton.com/resources/charts/inside-ring-blank-measurements-for-calculating-ring-blanks/
VIDEOS
Link to my Wrapped Ring Project: https://youtu.be/Y5k_4W6X7SU
Link to My Oxygen Concentrator Video: https://youtu.be/ExrK7_Lr7MQ
https://www.NancyLTHamilton.com
https://www.NancyLTHamiltonshop.com
Email: asknancylthamilton@gmail.com
Pinterest: https://www.pinterest.com/nancylthamilton/
Facebook: https://www.facebook.com/nancylthamiltonjewelry/
Instagram: @nancy.lt.hamilton
This page may have an affiliate link or two (or 20! ha!). By purchasing through these links, you are helping to support this channel. Thank you!
Видео The Split-Shank Ring канала Nancy Hamilton
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![The Split Shank Marquise Ring](https://i.ytimg.com/vi/CLyuPs32jss/default.jpg)
![Metalsmiths: Live From Lockdown - Behind the Scenes](https://i.ytimg.com/vi/4ZvwsoKD-Ns/default.jpg)
![Color Coding Saws | Jewelry Tips with Nancy](https://i.ytimg.com/vi/nIQHcKgNd4s/default.jpg)
![The Patterned Link Chain HD 1080p](https://i.ytimg.com/vi/PEsudj17RPQ/default.jpg)
![In Memory of WeeWee LouLoo](https://i.ytimg.com/vi/M-7xa2uBM4w/default.jpg)
![Chimera Arts Maker Music Festival](https://i.ytimg.com/vi/ASxMihQgeFs/default.jpg)
![How to make a hook and eye clasp (part 2 of 4) | Jewelry Tips with Nancy](https://i.ytimg.com/vi/R3MwdGU0B8o/default.jpg)
![Finding Center and Creating Precision Edges on Metal](https://i.ytimg.com/vi/3dD903vWUEY/default.jpg)
![How to make a hook and eye clasp (part 4 of 4) | Jewelry Tips with Nancy](https://i.ytimg.com/vi/GHp8vQClHgs/default.jpg)
![How to Make Metal Flowers, Part: 2](https://i.ytimg.com/vi/6uxHZUf-16M/default.jpg)
![Make Your Own Jewelry Tools: Make A Dapping Set (Mushroom Former) With Thermoplastics](https://i.ytimg.com/vi/NLz50uaJgkQ/default.jpg)
![The Wrapped Ring Project](https://i.ytimg.com/vi/Y5k_4W6X7SU/default.jpg)
![Setting a Marquise Stone for Faceted and Cabochon Gemstones](https://i.ytimg.com/vi/rt6sbXrBHDU/default.jpg)
![Soldering 101: Part 2 | Jewelry Tips with Nancy](https://i.ytimg.com/vi/rkdG1hd4LWA/default.jpg)
![How to Saw (part 2 of 2) | Jewelry Tips with Nancy](https://i.ytimg.com/vi/m60urgTTWUs/default.jpg)
![Straightening Wire | Jewelry Tips with Nancy](https://i.ytimg.com/vi/iP2UCZT5SHY/default.jpg)
![Tube Riveting | Jewelry Tips with Nancy](https://i.ytimg.com/vi/7SM-WZPV1Io/default.jpg)
![How to Clean Metal | Jewelry Tips with Nancy](https://i.ytimg.com/vi/yo_Jv5Rjebo/default.jpg)
![Setting up a portable oxygen/propane soldering system](https://i.ytimg.com/vi/900fZO-cMiE/default.jpg)
![Spinner and Trapped Spinner Beads](https://i.ytimg.com/vi/RTO5A2gJzm0/default.jpg)
![The Magnetic Clasp Video](https://i.ytimg.com/vi/TxviOiQJTro/default.jpg)