Engineering Graphics Lecture 013E Section of Solids V (Section of Hexagonal Pyramid by an AIP)
LECTURE SERIES ON ENGINEERING GRAPHICS
SECTION OF SOLIDS
SECTION OF HEXAGONAL PYRAMID BY AN AUXILIARY INCLINED PLANE (AIP)
This Lecture describes the applications of Section of Solids in Engineering Drawing and illustrates the terminology used in drawing Section of Solids.
Further, the applications and illustrations of Section plane inclined to the HP and perpendicular to the VP have been discussed in this Lecture:
Further, the following problem related to the Section of Solids has been illustrated in this Lecture:
A right regular hexagonal pyramid of base side 25 mm, axis 50 mm long is resting with its base on HP and one an edge of the base is perpendicular to VP. It is cut by a section plane perpendicular to VP and inclined to HP at 30° and passing through a point 20 mm below the vertex. Draw the front view, sectional top view and the true shape of the section. Also draw the sectional side view of the solid.
#sectionofsolids #engineeringdrawing #engineeringgraphicsclasses #https://www.youtube.com/@inderpreetsinghahuja4011
Видео Engineering Graphics Lecture 013E Section of Solids V (Section of Hexagonal Pyramid by an AIP) канала Inderpreet Singh Ahuja
SECTION OF SOLIDS
SECTION OF HEXAGONAL PYRAMID BY AN AUXILIARY INCLINED PLANE (AIP)
This Lecture describes the applications of Section of Solids in Engineering Drawing and illustrates the terminology used in drawing Section of Solids.
Further, the applications and illustrations of Section plane inclined to the HP and perpendicular to the VP have been discussed in this Lecture:
Further, the following problem related to the Section of Solids has been illustrated in this Lecture:
A right regular hexagonal pyramid of base side 25 mm, axis 50 mm long is resting with its base on HP and one an edge of the base is perpendicular to VP. It is cut by a section plane perpendicular to VP and inclined to HP at 30° and passing through a point 20 mm below the vertex. Draw the front view, sectional top view and the true shape of the section. Also draw the sectional side view of the solid.
#sectionofsolids #engineeringdrawing #engineeringgraphicsclasses #https://www.youtube.com/@inderpreetsinghahuja4011
Видео Engineering Graphics Lecture 013E Section of Solids V (Section of Hexagonal Pyramid by an AIP) канала Inderpreet Singh Ahuja
Комментарии отсутствуют
Информация о видео
20 июня 2024 г. 9:53:56
00:37:32
Другие видео канала
Engineering Graphics Lecture 016Z5 Orthographic Projections XXXI (Draw FV, TV and LHSV of object)
Engineering Graphics Lecture 010H Auxiliary Planes VIII (True Size and Form of an inclined Surface)
Engineering Graphics Lecture 016V Orthographic Projections XXII (Draw FV, TV, and RHSV of object)
Engineering Graphics Lecture 013H Section of Solids VIII (Section of Square Pyramid by an AIP)
Engineering Graphics Lecture 009S Projections of Oblique Lines XIX (TL between 2 Mangoes across wall
Engineering Graphics Lecture 012R Projection of Solids XVIII (Pentagonal Pyramid inclined to HP & VP
Engineering Graphics Lecture 016Z8 Orthographic Projections XXXIV (Draw FV, TV, and LHSV of object)
Engineering Graphics Lecture 008G Projections of Lines VII (Ortho projections of line inclined to VP
Engineering Graphics Lecture 009B Projections of Oblique Lines II (A,B Proj given draw Proj,TL,HT,VT
Engineering Graphics Lecture 007F Projections of Points VI Projections of Point in HP in Front of VP
Engineering Graphics Lecture 007I Projections of Points IX (Projections of a Point in VP & below HP)
Engineering Graphics Lecture 014T Development of Surfaces of Solids XX (Develop truncated Cylinder)
Engineering Graphics Lecture 016A Orthographic Projections I
Engineering Graphics Lecture 011V Projection of Planes XXII (Circular Lamina inclined to HP and VP)
Engineering Graphics Lecture 010G Auxiliary Planes VII (True Size and Form of an inclined Surface)
Engineering Graphics Lecture 014Z15 Development of Surfaces of Solids XXXXI SQ hole Pentagonal Prism
Engineering Graphics Lecture 009A Projections of Oblique Lines I (A,B Proj given draw Proj,TL,HT,VT)
Engineering Graphics Lecture 014X Development of Surfaces of Solids XXIV Develop Cylinder with Hole
Engineering Graphics Lecture 013N Section of Solids XIV (Section of Pentagonal Pyramid by an AVP)
Engineering Graphics Lecture 013B Section of Solids II(Section of Pentagonal Pyramid by AIP ∥ to HP)
