How to Build a Dog Dish Stand | Generation Next | Ask This Old House

Ask This Old House general contractor Tom Silva teaches a young woodworker how to build a dog dish stand using primarily power tools.

SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse

Time: 1-2 hours
Cost: $20 and up
Skill Level: Moderate

Tools:
Miter saw [https://amzn.to/38zpJHH]
Drill press [https://amzn.to/37GFwDc] or drill driver [https://amzn.to/2V19Upl]
Jigsaw [https://amzn.to/2P5uMIb]
Compass [https://amzn.to/2SD79cd]
Pocket hole jig [https://amzn.to/39JpKcb]
Palm sander [https://amzn.to/2Hz9gav]

Shopping List:
Food bowls [https://amzn.to/326nGIy]
1x10 pine [https://www.homedepot.com/s/1x10%2520lumber?NCNI-5]
1x12 pine [https://www.homedepot.com/s/1x12%2520lumber?NCNI-5]
Wipe-on polyurethane [https://amzn.to/37GScdk]
Rag [https://amzn.to/37GGY8C]
Pocket screws [https://amzn.to/39NLhAK]

Steps:
1. Start by cutting the 1x10 boards to size on the miter saw to act as the two legs.
2. Cut the 1x12 board to size on the miter saw to act as a top.
3. Outline an arch on the bottoms of the two legs to give them more shape. Using a drill or a drill press, drill two pilot holes at the top edges of each arch so you’ll have a consistent, rounded edge.
4. Cut out the remaining wood inside the arch using a jigsaw.
5. Use a compass to trace out holes on top of the 1x12 piece to hold the food bowls. Make sure the holes are wide enough to fit the bowls, but not so wide that the lips of the bowl won’t catch on the top.
6. Drill pilot holes in the top of the bowl to fit the jigsaw blade in.
7. Cut out each circle for the top of the dog dish stand using the jigsaw.
8. Assemble the stand using pocket hole screws. After drilling the pocket holes but before screwing everything together, give all the boards a good sanding.
9. Apply a wipe-on polyurethane to the sand using a rag.

Resources:
Tom taught Camilla to build the dog dish stand out of materials that can easily be found at any home center.

For the legs and top, Tom used 1x10 and 1x12 select pine, which can be found at the home center. He bought boards with two separate dimensions so that he didn’t have to use the table saw, which is a more advanced tool for children. To cut the boards to length, Tom had Camilla use the Kapex 120 sliding compound miter saw [https://amzn.to/37FB6MQ], which is manufactured by Festool (https://www.festoolusa.com/).

To cut the holes in the legs and for the dog bowls, Tom had Camilla use a jigsaw with a fine tooth cutting blade [https://amzn.to/38IGdNK].

To assemble the stand, Camilla used the Kreg Jig K4 pocket hole jig set [https://amzn.to/2wtDh9x], which is manufactured by Kreg Tools (https://www.kregtool.com/).

For the finish, Tom and Camilla applied a Watco Wipe-On Polyurethane [https://amzn.to/37GScdk] with a rag, which is manufactured by Rust-oleum (https://www.rustoleum.com/).

The dog dishes can be found at any pet supply store.

Generation Next:
This Old House’s Generation NEXT initiative shines a light on the urgent need for young people to enter the building trades and fill the skills gap in America today. “There’s a critical need for people in home construction,” says the This Old House master carpenter Norm Abram. The initiative has involved recruiting apprentices—some with no skills, some with a few years under their tool belts—to work alongside the TOH TV pros.

Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free.
https://bit.ly/2GPiYbH
 
Plus, download our app for streaming full episodes to your connected TV, phone or tablet:
https://bit.ly/34RYEP5

Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG

Watch the full episode:
https://www.thisoldhouse.com/season-18-ask-toh-episodes

How to Build a Dog Dish Stand | Generation Next | Ask This Old House
https://www.youtube.com/user/thisoldhouse/

Видео How to Build a Dog Dish Stand | Generation Next | Ask This Old House канала This Old House