Building a Privacy Fence | 58
Today, on Workshop Edits, I'm building and installing a privacy lattice fence extension to go above our backyard block brick wall. Recent backyard renovations fast tracked this project into existence.
The total length is about 96' between the two walls, the fence extensions add 2' of height overall to the fence, and everything is made from pressure treated wood, redwood, and outdoor rated screws and anchors so the fence should be naturally weather resistant for many years to come, and will hold up over time even better with proper care. Leave a comment if you have any questions!
🔔 SUBSCRIBE: https://goo.gl/pOkvJR
Chapters
0:00 - Introduction and Planning
1:39 - Treated Lumber Post Prepping
3:35 - Installation of Posts and Lattice
5:41 - Old Privacy Fence Demolition
6:11 - Step by Step Installation of Post and Fence
9:39 - Trimming Posts to Final Length
9:55 - End Cap Installation
10:50 - Outdoor Sealer Finish
11:53 - Final Shots + Cost
12:33 - Outro
🌳 MATERIALS
12 x 8’ x 2‘ Redwood Lattice Panels
(Home Depot)
https://www.homedepot.com/p/Mendocino-Forest-Products-1-3-8-in-x-2-ft-x-8-ft-Framed-Redwood-Garden-Lattice-01261/202287555
3.75” x 1/4" TapCon Screws
(Lowes - 75 pack; includes Masonry Bit)
https://www.lowes.com/pd/Tapcon-75-Pack-3-3-4-in-x-1-4-in-Concrete-Anchors/3102423
14 x 4” x 4“ Redwood Post Caps
(Lowes, ~$3/cap)
https://www.lowes.com/pd/Deckorators-Fits-Common-Post-Measurement-4-in-x-4-in-Actual-3-96-in-x-4-in-x-0-97-in-Hatteras-Castine-Unlit-Redwood-Deck-Post-Cap/3067827
Thompson’s Outdoor Sealer (1 Gal - Autumn Brown)
https://amzn.to/2X7v1Wu
14 x 4” x 4“ x 8’ Pressure Treated Posts
(stained, severe weather and ground contact rated - purchased at Local Lumber yard)
~60 x 3” Outdoor Rated Wood Screws
🗜 TOOLS
Power Drill: http://amzn.to/2q1l5wn
Impact Driver: http://amzn.to/2q1l5wn
Circular Saw: http://amzn.to/2q1l5wn
Reciprocating Saw: http://amzn.to/2q1l5wn
Corded Hand Planer: http://amzn.to/2p1arXS
Cordless Orbital Sander: http://amzn.to/2oICOaP
3' Long Level
Squeeze Clamp
Speed Square
Recommended: Hammer Drill
Optional: Wagner Flexio 5000 HVLP Sprayer: https://amzn.to/3dVDD9l
Optional: Belt Sander; Angle Grinder
📽 FILM / EDIT EQUIPMENT:
Panasonic G7: https://amzn.to/2DA7fuS
US CAMEL Tripod: http://amzn.to/2hbbVdg
📲 Check me out on SOCIAL MEDIA!
INSTAGRAM: instagram.com/workshopedits
FACEBOOK: facebook.com/workshopedits
Thanks for watching!
Zach
Видео Building a Privacy Fence | 58 канала Workshop Edits
The total length is about 96' between the two walls, the fence extensions add 2' of height overall to the fence, and everything is made from pressure treated wood, redwood, and outdoor rated screws and anchors so the fence should be naturally weather resistant for many years to come, and will hold up over time even better with proper care. Leave a comment if you have any questions!
🔔 SUBSCRIBE: https://goo.gl/pOkvJR
Chapters
0:00 - Introduction and Planning
1:39 - Treated Lumber Post Prepping
3:35 - Installation of Posts and Lattice
5:41 - Old Privacy Fence Demolition
6:11 - Step by Step Installation of Post and Fence
9:39 - Trimming Posts to Final Length
9:55 - End Cap Installation
10:50 - Outdoor Sealer Finish
11:53 - Final Shots + Cost
12:33 - Outro
🌳 MATERIALS
12 x 8’ x 2‘ Redwood Lattice Panels
(Home Depot)
https://www.homedepot.com/p/Mendocino-Forest-Products-1-3-8-in-x-2-ft-x-8-ft-Framed-Redwood-Garden-Lattice-01261/202287555
3.75” x 1/4" TapCon Screws
(Lowes - 75 pack; includes Masonry Bit)
https://www.lowes.com/pd/Tapcon-75-Pack-3-3-4-in-x-1-4-in-Concrete-Anchors/3102423
14 x 4” x 4“ Redwood Post Caps
(Lowes, ~$3/cap)
https://www.lowes.com/pd/Deckorators-Fits-Common-Post-Measurement-4-in-x-4-in-Actual-3-96-in-x-4-in-x-0-97-in-Hatteras-Castine-Unlit-Redwood-Deck-Post-Cap/3067827
Thompson’s Outdoor Sealer (1 Gal - Autumn Brown)
https://amzn.to/2X7v1Wu
14 x 4” x 4“ x 8’ Pressure Treated Posts
(stained, severe weather and ground contact rated - purchased at Local Lumber yard)
~60 x 3” Outdoor Rated Wood Screws
🗜 TOOLS
Power Drill: http://amzn.to/2q1l5wn
Impact Driver: http://amzn.to/2q1l5wn
Circular Saw: http://amzn.to/2q1l5wn
Reciprocating Saw: http://amzn.to/2q1l5wn
Corded Hand Planer: http://amzn.to/2p1arXS
Cordless Orbital Sander: http://amzn.to/2oICOaP
3' Long Level
Squeeze Clamp
Speed Square
Recommended: Hammer Drill
Optional: Wagner Flexio 5000 HVLP Sprayer: https://amzn.to/3dVDD9l
Optional: Belt Sander; Angle Grinder
📽 FILM / EDIT EQUIPMENT:
Panasonic G7: https://amzn.to/2DA7fuS
US CAMEL Tripod: http://amzn.to/2hbbVdg
📲 Check me out on SOCIAL MEDIA!
INSTAGRAM: instagram.com/workshopedits
FACEBOOK: facebook.com/workshopedits
Thanks for watching!
Zach
Видео Building a Privacy Fence | 58 канала Workshop Edits
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Closeboard fencing & Trellis with gatesHow To Build A Fence : DIY PRIVACY FENCEHow To Make A Simple Outdoor ScreenBuild a privacy fence on top of a block wallVinyl Fence on Block Wall - The Hardscape Handymen - Whittier, CATrellis Topped Fence, Solo BuildHow to Build a Block Wall DIY #355 Easy DIY Backyard Privacy Fence Ideas | Garden Ideas5 Mistakes NOT to Make When Building a FenceThe Fence ExtenderBailey Built: How to build a DIY Privacy Lattice FenceHow to Install a Wood Fence Above a WallBackyard Fence Design Ideas | Backyard Privacy Fence | Backyard Garden Wooden FenceHow to Attach a Trellis to a Concrete Wall | This Old HouseHow to Fix Timber to Brickwork - Fencing and GatesBuilding a horizontal privacy fenceHow to Fit a Post to a Concrete Block Wall YourselfEasy fence DIY: Privacy Lattice ExtensionTop 5 Plants for Fence That Provide Extra Privacy | Privacy Fence (Hedge) Landscaping 👌How To Build A 6' Wooden Privacy Fence