Making a Huge Waterblock from Scrap Copper -Trash to Treasure
I Design, Cast, and Machine a huge water block from scrap Copper to cool a very large and intense surface mount COB LED chip for an insanely bright LED light engine I'm building.
First I get the scrap copper, Design my part in CAD, then I melt and cast the metal into a mould, Machine it and finish it in the CNC mill and finally cut out a see-through back cover with the waterjet to see inside of the water block as its working
Originally I was going to buy solid pieces of metal and machine my parts, but unfortunately all of the material that I need, the size I need it is not available for probably at least a few months.
That's why I decided to take scrap copper, melt it down in a furnace and shape it into what I need to make my parts and I now have my light engine fully operational at full power.
Fun Fact: Any static in this video was caused by 12μm Carbon dust that made its way into my camera and equipment...fun times.
↓↓Social media Links↓↓
🐦 ► Twitter: https://twitter.com/WarpPerception
👍 ► Facebook: https://www.facebook.com/WarpPerception/
◙ ► Instagram: https://www.instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
Видео Making a Huge Waterblock from Scrap Copper -Trash to Treasure канала Warped Perception
First I get the scrap copper, Design my part in CAD, then I melt and cast the metal into a mould, Machine it and finish it in the CNC mill and finally cut out a see-through back cover with the waterjet to see inside of the water block as its working
Originally I was going to buy solid pieces of metal and machine my parts, but unfortunately all of the material that I need, the size I need it is not available for probably at least a few months.
That's why I decided to take scrap copper, melt it down in a furnace and shape it into what I need to make my parts and I now have my light engine fully operational at full power.
Fun Fact: Any static in this video was caused by 12μm Carbon dust that made its way into my camera and equipment...fun times.
↓↓Social media Links↓↓
🐦 ► Twitter: https://twitter.com/WarpPerception
👍 ► Facebook: https://www.facebook.com/WarpPerception/
◙ ► Instagram: https://www.instagram.com/warped.perception
☢ ► IMDB: http://www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
http://www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka
Видео Making a Huge Waterblock from Scrap Copper -Trash to Treasure канала Warped Perception
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Jet Go-Kart Top Speed RunMiniature V8 Engine Runs CRAZY - (78cc DOHC 6HP)Diesel in a Tesla (Drove 2700 Miles without Charging)How I Built the RC Jet Car for Mr BeastCordless Tesla (I Drive 1800 miles without charging)Jet Powered ScooterWorlds Smallest Rotary Engine (30,000 RPM)See Thru Jet EngineWorld's Smallest V8 Engine Hits 10,500 RPM on Nitro (1.7 Cu In 28cc)Mini Harley Davidson Panhead Engine (Sounds Like the Real Thing)See Thru Intercooler In Slow Motion - (Dyno Run High Boost)See Thru IntercoolerJet Powered TeslaTurbo Diesel Go-Kart Big Gear Top Speed FULL SENDHydrogen Powered Liquid Piston Rotary Go-KartTow Charging Tesla at 70MPH for 25 milesTurbo Diesel CVT Go-Kart P.2 - Top SpeedSee Thru Liquid Piston Rotary Engine - In Slow MotionGoPro Inside a DishwasherJet Powered Go Kart