Загрузка страницы
Все видеоНовые видеоПопулярные видеоКатегории видео

Pressure Turning

If you have ever needed to turn the OD of a thin plate or the entire outside of a part, pressure turning is the way to go. When crazy glue or double sided tape aren't practical, this will get the job done. Please be aware this technique is dangerous and should be done with extreme caution. Take a look.
Website: https://www.advancedinnovationsllc.com
Patreon Support or Donations: https://www.patreon.com/joepie
Web Store: https://www.advancedinnovationsllc.com/shop

Видео Pressure Turning канала Joe Pieczynski
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
1 октября 2017 г. 22:04:12
00:18:18
Joe Pieczynski
Теги
Правообладателям
Жалоба
Комментарии
Другие видео канала
Need to cut a Trepan or Face groove? Check this one out.Need to cut a Trepan or Face groove? Check this one out.Producing Extremely Thin Wall Parts ---Made EasyProducing Extremely Thin Wall Parts ---Made EasyGet Your Steady Rest AlignedGet Your Steady Rest AlignedMicro Drilling -- Stop Breaking Small Drills !!Micro Drilling -- Stop Breaking Small Drills !!Size matters - Large diameter turning, facing, and boring on the mini latheSize matters - Large diameter turning, facing, and boring on the mini latheHow to cut a RadiusHow to cut a RadiusTurning Weld Build Up With High Speed SteelTurning Weld Build Up With High Speed SteelHow To Resurface a Brake Disc RotorHow To Resurface a Brake Disc RotorNo Indexing Head...Not a problem - Take a lookNo Indexing Head...Not a problem - Take a lookRemoving Sub Surface, Snapped off Bolts -- Take a Look !!Removing Sub Surface, Snapped off Bolts -- Take a Look !!Unique Shop Tools - Revealed Vol. 1Unique Shop Tools - Revealed Vol. 1Get your parts to run true in a non adjustable chuck. YOU MUST WATCH THIS!Get your parts to run true in a non adjustable chuck. YOU MUST WATCH THIS!Machining Large Undercuts on the Lathe with Less ChatterMachining Large Undercuts on the Lathe with Less ChatterCan You Grind Tools on a Milling Machine? YES -- Take a Look !!Can You Grind Tools on a Milling Machine? YES -- Take a Look !!Safe and Easy Internal threading with a hard stopSafe and Easy Internal threading with a hard stopScrew removalScrew removalBasics of a Parting ToolBasics of a Parting ToolHow to Hold and Bore Out Thin ShimsHow to Hold and Bore Out Thin ShimsKnurling and a Few Things you Should KnowKnurling and a Few Things you Should KnowSetting lathe tools on centerSetting lathe tools on center
Статистика портала
Яндекс.Метрика
© 2008-2024 «Информационно-развлекательный портал города Верхняя Салда»
| Карта портала | Реклама | Контакты | Сообщить об ошибке | Соглашения
salda.ws salda.ws@mail.ru
Сейчас на сайте: 512 Статистика портала