Tailstock Fundamentals: How to use the Tailstock on a Haas Lathe
This video covers a wide array of topics related to using the tailstock on your CNC Turning Center.
Some of the subjects we touch on are: length to diameter ratio, center drilling, choosing a tailstock pressure, dealing with fragile parts, and choosing and maintaining your live center.
We also review the particular methods for commanding and controlling the Haas Tailstock with M-codes and Settings.
We finish up by watching the same part cut with tailstock support and also without support. Watch the video to see which part finishes first.
Jump to a Specific Chapter:
1. Length to Diameter Ratio: 0:37
2. Center Drilling: 2:35
3. Facing: 3:12
4. Center Drill Depth: 4:50
5. Tailstock Commands: 6:03
6. Setting Tailstock Pressure: 13:27
7. Live Centers: 21:19
8. Unsupported vs. Supported Turning: 24:40
Don’t miss any Haas videos. Click here: http://ow.ly/s28l30mTiUo
Music:
“Divider” by Chris Zabriskie - http://chriszabriskie.com/
“Air Hockey Saloon”
“Mario Bava Sleeps in a Little Later Than He Expected To”
Видео Tailstock Fundamentals: How to use the Tailstock on a Haas Lathe канала Haas Automation, Inc.
Some of the subjects we touch on are: length to diameter ratio, center drilling, choosing a tailstock pressure, dealing with fragile parts, and choosing and maintaining your live center.
We also review the particular methods for commanding and controlling the Haas Tailstock with M-codes and Settings.
We finish up by watching the same part cut with tailstock support and also without support. Watch the video to see which part finishes first.
Jump to a Specific Chapter:
1. Length to Diameter Ratio: 0:37
2. Center Drilling: 2:35
3. Facing: 3:12
4. Center Drill Depth: 4:50
5. Tailstock Commands: 6:03
6. Setting Tailstock Pressure: 13:27
7. Live Centers: 21:19
8. Unsupported vs. Supported Turning: 24:40
Don’t miss any Haas videos. Click here: http://ow.ly/s28l30mTiUo
Music:
“Divider” by Chris Zabriskie - http://chriszabriskie.com/
“Air Hockey Saloon”
“Mario Bava Sleeps in a Little Later Than He Expected To”
Видео Tailstock Fundamentals: How to use the Tailstock on a Haas Lathe канала Haas Automation, Inc.
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Chuck Installation GuideSpindle Speed Variation - Stop chatter on your CNC lathe - Haas AutomationSNS 225 Part 1: Headstock & Tailstock Alignment, Starrett Wall ChartsMachining Sleeve FixtureER Collet Essentials. Do You Know? – Haas Automation Tip of the DayHaas Automatic Tool Presetter — How ToИспользование задней бабки на токарном станке HAASModern High Speed CNC Lathe Machine Working, CNC Milling Machine MetalCNC Mill Tutorial81 TAILSTOCK USE ON CNC LATHE OR CNC VMC TURNING MACHINE .PROGRAMMING AND OPERATING TRAININGHow to Properly Cut Lathe Soft Jaws — Part 1: Fundamentals and OD GrippingHaas TL-1 CNC Lathe Setup & OperationHow to: Set Tool Length and Work Offsets – Haas Automation Tip of the DaySet Up Live Tools Properly on Your Haas Lathe – Haas Automation Tip of the DaySpindle Speed Variation - Stop chatter during CNC turningG & M Code: CNC Lathe Programming by Hand - Vlog #91Haas ST-20Y / WTO Broaching Head / Iscar Metals Broaching Tool9 Lines of Code Every CNC Machinist Needs To Know! - Haas Automation Tip of the DayLathe Part Stop Essentials. Do You Know? – Haas Automation Tip of the DayHow to Properly Cut Lathe Soft Jaws — Part 2: ID Gripping, Re-cutting, and Adding a Taper