Interior LED courtesy Lights

Install LED lights by your feet. These are nice courtesy lights that help you see where your feet are at night and only light up when you open the door.

Materials:
1 x Spool of led strip ($12 for 16.4 feet)
1 x Spool of wire ($10)
1 x Plexi-glass(Price Varies... $5 - $15)
2 x Screws

Tools:
Drill
Drill Bit to match screw
Heat Gun
Glue Gun

Steps:
1) Cut square Plexiglas the length of the led strip
-Leave room to bend it at an angle
2) Bend the Plexiglas to the desired angle with the heat-gun
3) Place LEDs on Plexiglas.
4)Drill two holes the size of the screw on the Plexiglas for mounting
5) Wire the led strip. Be sure to leave enough wire to connect it to the power wires.
6) Mount Plexiglas on vehicle. For best/permanent results use anchor screws if you want to mount it on the carpet.
7) Run wires to a power source and the dome light switch.

DONE!

LINKS:
Wiring 12v Led strips - http://youtu.be/dh58lbZutik

If my video has helped you, please consider donating to my channel. This shows you really enjoyed the video and would like to see more! Thank you

Видео Interior LED courtesy Lights канала Christian Macias