SHO’NUFF we set up the Clutch and Throwout bearing shimming
We unbox and put the clutch on. Change some things on the bellhousing and shim the throwout bearing. An evening chillen and working on SHO’NUFF .
Merchandise available at
PFIspeed.com
Tuning info at
Sales@pfispeed.com
Send mail to
PFIspeed
P.O. box 503
Wellington,co
80549
Видео SHO’NUFF we set up the Clutch and Throwout bearing shimming канала PFI Speed
Merchandise available at
PFIspeed.com
Tuning info at
Sales@pfispeed.com
Send mail to
PFIspeed
P.O. box 503
Wellington,co
80549
Видео SHO’NUFF we set up the Clutch and Throwout bearing shimming канала PFI Speed
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
SHO’NUFF , Consume the ChassisHow to Measure and Shim Your Tremec T56 Performance Clutch (For Camaro and LS Swaps)Clutch, Flywheel and Rear Main Seal Replacement - E46 M3 build pt 9SHO’NUFF Has a Heart and Belly PansTransmission Broke🤦🏻♀️😏Hydraulic Release Bearing (See it inside)Turbo Minivan Gets a Twin Disc Clutch!Throwout Bearing and Slave Cylinder Jeep 4.0 1987-1993Why you should not PARTIALLY press the Clutch ?Clutch Masters: ep.1 Flywheels aluminum and steel.Lining Up the Engine with the ChassisT56 is INSTALLED! Tilton Throw Out Bearing clearance, T56 Magnum F swap Part 3The Bully Civic gets a V6?!?!?Removing / Adding Shims to Throw Out Bearing on a Saginaw 4 Speed in our 1970 Chevelle - How ToMAJOR S2000 Issue? Weird Hesitation, Sluggish Problem - SOLVEDJay's Tech Tips #42 - How to Avoid Problems Multiplate Clutches - Real Street PerformanceHow To Replace A Pilot BearingCoyote Swap Mustang New Best ET & Info On Launching (Clutch Set Up) at BrenspeedClutch Alignment How To / How To Use a Clutch Alignment Tool | Tech Tip 12Putting a Twin Disc Clutch in the Hatch