Mustang Dynacorn Front Floor Cross Brace 1983-1993 Installation
Bill shows you how to install a Dynacorn Front Floor Cross Brace and Seat Platform on your 1983-1993 Mustang.
Purchase Product Here:
http://www.cjponyparts.com/dynacorn-front-floor-cross-brace-and-seat-platform-1983-1993/p/3648XC/
In this video we are showing you how to install Dynacorn's front floor cross brace and seat platform fitting all 1983-1993 Mustangs, using our 1991 Mustang Notchback. The front floor cross brace goes across the front floor pan from rocker to rocker and over the transmission tunnel.The bucket seats bolt to this part and this piece is often damaged resulting in a major safety hazard.
To replace the cross brace requires welding, so this would not be for the amateur installer. This installation will be time consuming since you have to remove most of your Mustang's interior, but do take your time and make sure everything is done correctly.
Replacing the cross brace is the best option if your factory seat platform is damaged.
Check out more Mustang Floor Pan parts from CJ's here:
http://www.cjponyparts.com/mustang-floor-pans/c/60020100/
Check out more Dynacorn parts from CJ's here:
http://www.cjponyparts.com/dynacorn/c/8_1001_47/
Subscribe to CJ Pony Parts on YouTube here:
http://www.youtube.com/subscription_center?add_user=cjponyparts
Видео Mustang Dynacorn Front Floor Cross Brace 1983-1993 Installation канала CJ Pony Parts
Purchase Product Here:
http://www.cjponyparts.com/dynacorn-front-floor-cross-brace-and-seat-platform-1983-1993/p/3648XC/
In this video we are showing you how to install Dynacorn's front floor cross brace and seat platform fitting all 1983-1993 Mustangs, using our 1991 Mustang Notchback. The front floor cross brace goes across the front floor pan from rocker to rocker and over the transmission tunnel.The bucket seats bolt to this part and this piece is often damaged resulting in a major safety hazard.
To replace the cross brace requires welding, so this would not be for the amateur installer. This installation will be time consuming since you have to remove most of your Mustang's interior, but do take your time and make sure everything is done correctly.
Replacing the cross brace is the best option if your factory seat platform is damaged.
Check out more Mustang Floor Pan parts from CJ's here:
http://www.cjponyparts.com/mustang-floor-pans/c/60020100/
Check out more Dynacorn parts from CJ's here:
http://www.cjponyparts.com/dynacorn/c/8_1001_47/
Subscribe to CJ Pony Parts on YouTube here:
http://www.youtube.com/subscription_center?add_user=cjponyparts
Видео Mustang Dynacorn Front Floor Cross Brace 1983-1993 Installation канала CJ Pony Parts
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Mustang Eibach Suspension Kit Pro-Plus Coupe/Hatchback GT/Cobra 1979-1993 InstallationRusty Floor Pan Repair Removal tools and set up Episode 343 Autorestomod1966 Mustang Floor Pan InstallationHigh-Grip Race Suspension Conversion For The Fox Body: Part 2 - Engine Power S1, E13CMS Motorsports & Restoration | Season 1 Episode 2 - 1993 Ford Mustang Cobra FoxbodyASC McLaren Fox Body Coyote Swap | Project Mercury Rising Full Series VideoFox Body Mustang Suspension Basics For Better 60 ft Times! Part 2!1983 Foxbody Mustang Gets Coyote Swapped and Restored For Make A Wish By American Muscle - Hot LapFoxbody Mustang Street-Car Paintjob!!!1965 Mustang trunk pan install and initial fitment of quarter panel. Mystique part 5Building A 1965 Ford Mustang Fastback Shell From ScratchInstalling an LS in a 50 GMC that with and S10 subframe.How To Repair Floor Pans Part 2 on Repair Restore Revive Ep.2: - Sheet Metal Fab - Eastwood*FIRST MODS* What are the essential first foxbody modifications?Repairing dreaded shock tower/ frame rust!Fox Body Mustang Restoration Paint Process with Tony D Freestyle First VlogMake Your S197 Even Better With These 💡🚨| Renegade | 2010-2014 Mustang1986 Mustang GT Project - Fat Mat Insulation and Carpet InstallMustang rear valance issues. Brooklyn Pony part 36.