Forged Carbon Fiber - Chopped Fibers (PART2 Result & New experiment)
Hi everyone, In the second part of these forged Carbon Fiber adventures I go through the demoulding of the part we did in the last video. PART1: https://youtu.be/Vz51kPmAPeE
At the end I go through the numbers and conclusions. I’ve also started a new test making a more complex part with resin infusion using epoxy resin this time on a more complex part to check out the finish on a 3D part.
Going through the numbers of the test sample we made in the previous tutorial we can conclude we end up with a 3-1 Resin to Fiber ratio, which is A LOT of resin. Compared to a 1-1 ratio normally for regular fibers with resin using Resin infusion.
Pretty happy with the look of the chopped carbon fiber from @Easy Composites Ltd and finish on the new part.
Step by step we will be doing more testing to find out everything about forged carbon fiber.
If you want to stay up to date with all following experiments make sure to subscribe and ask questions in the comments during the following videos. I’ll try to address all questions and answer all of them.
Products used:
IN2 Epoxy resin (Fast hardener)
Chopped Carbon fiber 10-30
650g/m² twill weave 12K Carbon fiber
For more of my projects Make sure to follow me on:
Facebook: https://www.facebook.com/MAT2COMPOSITES
Instagram: matthieu.libeert
twitter: @matthieutje65
web: https://www.mat2composites.com
#forged #carbon #fiber #easycomposites
Видео Forged Carbon Fiber - Chopped Fibers (PART2 Result & New experiment) канала Matthieu Libeert
At the end I go through the numbers and conclusions. I’ve also started a new test making a more complex part with resin infusion using epoxy resin this time on a more complex part to check out the finish on a 3D part.
Going through the numbers of the test sample we made in the previous tutorial we can conclude we end up with a 3-1 Resin to Fiber ratio, which is A LOT of resin. Compared to a 1-1 ratio normally for regular fibers with resin using Resin infusion.
Pretty happy with the look of the chopped carbon fiber from @Easy Composites Ltd and finish on the new part.
Step by step we will be doing more testing to find out everything about forged carbon fiber.
If you want to stay up to date with all following experiments make sure to subscribe and ask questions in the comments during the following videos. I’ll try to address all questions and answer all of them.
Products used:
IN2 Epoxy resin (Fast hardener)
Chopped Carbon fiber 10-30
650g/m² twill weave 12K Carbon fiber
For more of my projects Make sure to follow me on:
Facebook: https://www.facebook.com/MAT2COMPOSITES
Instagram: matthieu.libeert
twitter: @matthieutje65
web: https://www.mat2composites.com
#forged #carbon #fiber #easycomposites
Видео Forged Carbon Fiber - Chopped Fibers (PART2 Result & New experiment) канала Matthieu Libeert
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Make Forged Carbon Fibre Parts Using Compression MouldingDIY Forged Carbon Skinning on a Budget - 370Z panels! Read description before attempting!DIY Forged Carbon Skinning Tutorial - A Complete GuideForged Carbon Fiber - Chopped Fibers (PART3 New Samples & Break Samples )RTM Mould - Finish Part With Patterncoat (PART1/4)Carbon Fiber vs Kevlar vs Fiberglass - Which one is right for YOU?How to Cast a Two-Part Compression Mould for Forged Carbon FibreMolding a Mask with Forged Carbon Fiber FabricHow to Cut Carbon Fibre Sheet and Carbon Fiber Parts (Technique & Safety)REAL Carbon Fiber VS Carbon WRAP!!Are CARBON FIBER SWORDS possible?Forged Carbon Fiber - Chopped Fibers (PART1 Testplate & Thoughts)Fibreglass/FRP Split-Mould Making Guide (Carbon Fibre Airbox Pt.2)Forged Carbon Fiber - Chopped Fibers (PART4 Test Results & Real Forged)Wet laying carbon fibre 2x2 cloth and chopped forged style carbon tutorialKnife Scales For Jimmy DirestaI Made a Forged Carbon Fiber Part for my Car!Making A Silver Smoke Custom Pool Cue With Carbon Fiber Shaft (4k)Gold Forged Carbon Fiber Cured Sheet with Vacuum Bagging