DIY Solar Lamp | Solar Lamp for Home | Automatic Solar Light | 3D printed Solar Lamp

#diysolarlamp #solaremergencylight #solargardenlight

In this video, I will show you how I have made a Solar Lamp by using few electronics components. I have made the PCB in Autodesk Fusion 360. Then made the customized 3D printed enclosure for the Lamp.

This small lamp is mainly designed to get the basic light required for rural people by replacing their harmful kerosine lamp.

🔴 Instagram id link: https://www.instagram.com/opengreenenergy/

*******************************************************************************
This project was presented on AU2020, you can watch the full video on the Autodesk page:

https://www.autodesk.com/autodesk-university/class/Design-Nocturnal-Solar-Light-Bulb-60-Minutes-2020
*******************************************************************************
Instructables : https://www.instructables.com/member/opengreenenergy/instructables/

Download the 3D printed enclosures files: https://www.thingiverse.com/thing:4660405

*****************************************************************************

Materials Used

1. Solar Panel -2V: https://amzn.to/3nKqll6

2. IC QX5252F: https://amzn.to/35NYbzq

3. 33uH Inductor: https://amzn.to/3kPb00z

4. 8mm Straw Hat LED: https://amzn.to/3nMcI4W

5. Switch: https://bit.ly/2KtrcYZ

6. DC Jack: https://amzn.to/2HrOGww

7. AA NiMh Battery: https://amzn.to/35QrvFB

8. Battery Spring Plates: https://amzn.to/2UJva1o

9. 22 AWG wires: https://amzn.to/2UJcbEi

10. Heatshrink Tubing: https://amzn.to/3lR7RPl

10. JST male-female connectors: https://amzn.to/2KnYOqZ

11. PCB: https://bit.ly/2IVj4Qw

12. 1W Solar Panel ( 3 - 5V ): https://amzn.to/2IXsQBq

Видео DIY Solar Lamp | Solar Lamp for Home | Automatic Solar Light | 3D printed Solar Lamp канала Open Green Energy