DIY Garage Shelves / Shelf / Workbench / Storage / industrial
Follow me Nerds, as I show you how I built this light-up workbench and shelving system by myself (One person build), but if you have help it's twice as easy.
This technique works for all applications including floors with and without slopes.
➤ ***PLEASE SUBSCRIBE*** :) http://www.youtube.com/c/WoodNerds?sub_confirmation=1
***instead of splicing the wires for the lights above the bench, they make extended cords (link listed below). A much safer and up to code option***
Wood and Cuts:
(25)- 8' long 2"X4" (Might need more or less depending on length and height of garage. My garage is less than 16' so I had to cut the horizontal framing by 6" on one side and the 29 internal boards were cut @ 27")
(5)- 8' long 1"X3" (I split mine with the table saw so if you don't want to do that perhaps get 10-1"X2" instead) (used for pegboard framing) (cut to desired size of pegboards)
(2)-4'X8' pegboard sheets (cut to desired height and length - mine is 36"X84" and 39"X29" for the side pieces on the dividers
(5)(total) - 23/32" 4'X8' plywood sheets (3/4" or 1/2" should also be okay pending your application)
all 5 cut @ 30" (2 were cut in half for my 4 - 4' shelf sections and then trimmed on the left side to fit my garage length)
2 of the leftover 18" sheets to be cut at 12" (To pair with the 18" sheets to complete 30" deep shelves on top)
Try Amazon Prime 30 days for free!!! (fast free shipping on items marked “prime” as well as free amazon video - thousands of movies and tv shows available and amazon music!): https://amzn.to/2YouZd8
➤VIP TOOL LIST:
Clamps: https://amzn.to/3aMhE2v
Screws 3" (Seriously Try these out if you haven't): https://amzn.to/2zCT736
Screws 4" (probably get two packs): https://amzn.to/35irOXI
Keg K4 System: https://amzn.to/2W9PglV
Ryobi Nial Gun (HIGHLY Recomended): https://amzn.to/2VriTh5
**I keep getting comments about my hat (here is one I just bought from the same company, might need to look around for the state/design you like best):
https://amzn.to/3cCtMUL
➤Linked tools/Materials:
Totes(Reported deals at Sam's Club and Costco): https://amzn.to/3aT8wZX
Bench Lights (AWESOME DEAL): https://amzn.to/2SlowgZ
***THEY MAKE EXTENSIONS FOR THE LIGHT CABLES!!!(I didn’t know this before): https://amzn.to/2TdqJLX
Extended light power cable with switch: https://amzn.to/2Zgsw6C
Stud finder(upgraded version of mine): https://amzn.to/2WV50dV
Wood Glue: https://amzn.to/2CIL8k4
2.5” pocket hole screws: https://amzn.to/3ctKaYD
12 inch Chicago Electric Miter Saw (Best tool I have): https://amzn.to/2CNjG4Z
10 inch Chicago Electric Miter Saw (Alternative): https://amzn.to/2BY2F6j
Ryobi Table Saw: https://amzn.to/2BSyA8e
Ryobi Drill: https://amzn.to/2CMO9Ad
Belt sander (Awesome Sander): https://amzn.to/2RrRVa3
Speed Square (super useful and cheap!): https://amzn.to/2VkhCZr
Smaller Clamps: https://amzn.to/35hDOsl
Right Angle Tool for Clamps: https://amzn.to/2SmiZ9Z
_____________________________________________________
Disclaimer:
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
Видео DIY Garage Shelves / Shelf / Workbench / Storage / industrial канала Wood Nerds
This technique works for all applications including floors with and without slopes.
➤ ***PLEASE SUBSCRIBE*** :) http://www.youtube.com/c/WoodNerds?sub_confirmation=1
***instead of splicing the wires for the lights above the bench, they make extended cords (link listed below). A much safer and up to code option***
Wood and Cuts:
(25)- 8' long 2"X4" (Might need more or less depending on length and height of garage. My garage is less than 16' so I had to cut the horizontal framing by 6" on one side and the 29 internal boards were cut @ 27")
(5)- 8' long 1"X3" (I split mine with the table saw so if you don't want to do that perhaps get 10-1"X2" instead) (used for pegboard framing) (cut to desired size of pegboards)
(2)-4'X8' pegboard sheets (cut to desired height and length - mine is 36"X84" and 39"X29" for the side pieces on the dividers
(5)(total) - 23/32" 4'X8' plywood sheets (3/4" or 1/2" should also be okay pending your application)
all 5 cut @ 30" (2 were cut in half for my 4 - 4' shelf sections and then trimmed on the left side to fit my garage length)
2 of the leftover 18" sheets to be cut at 12" (To pair with the 18" sheets to complete 30" deep shelves on top)
Try Amazon Prime 30 days for free!!! (fast free shipping on items marked “prime” as well as free amazon video - thousands of movies and tv shows available and amazon music!): https://amzn.to/2YouZd8
➤VIP TOOL LIST:
Clamps: https://amzn.to/3aMhE2v
Screws 3" (Seriously Try these out if you haven't): https://amzn.to/2zCT736
Screws 4" (probably get two packs): https://amzn.to/35irOXI
Keg K4 System: https://amzn.to/2W9PglV
Ryobi Nial Gun (HIGHLY Recomended): https://amzn.to/2VriTh5
**I keep getting comments about my hat (here is one I just bought from the same company, might need to look around for the state/design you like best):
https://amzn.to/3cCtMUL
➤Linked tools/Materials:
Totes(Reported deals at Sam's Club and Costco): https://amzn.to/3aT8wZX
Bench Lights (AWESOME DEAL): https://amzn.to/2SlowgZ
***THEY MAKE EXTENSIONS FOR THE LIGHT CABLES!!!(I didn’t know this before): https://amzn.to/2TdqJLX
Extended light power cable with switch: https://amzn.to/2Zgsw6C
Stud finder(upgraded version of mine): https://amzn.to/2WV50dV
Wood Glue: https://amzn.to/2CIL8k4
2.5” pocket hole screws: https://amzn.to/3ctKaYD
12 inch Chicago Electric Miter Saw (Best tool I have): https://amzn.to/2CNjG4Z
10 inch Chicago Electric Miter Saw (Alternative): https://amzn.to/2BY2F6j
Ryobi Table Saw: https://amzn.to/2BSyA8e
Ryobi Drill: https://amzn.to/2CMO9Ad
Belt sander (Awesome Sander): https://amzn.to/2RrRVa3
Speed Square (super useful and cheap!): https://amzn.to/2VkhCZr
Smaller Clamps: https://amzn.to/35hDOsl
Right Angle Tool for Clamps: https://amzn.to/2SmiZ9Z
_____________________________________________________
Disclaimer:
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
Видео DIY Garage Shelves / Shelf / Workbench / Storage / industrial канала Wood Nerds
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
EXTREME GARAGE STORAGE & ORGANIZATION | DIY GARAGE SHELVING | MORE WITH MORROWSHOW TO BUILD A WORKBENCH FOR GARAGE / DIY Garage Workbench and ShelvesUltimate French Cleat Tool WallCReeves Makes the Mobile Outfeed Assembly Table with Kreg Features ep020Easy Concrete Countertops | Concrete Countertops How ToHOW TO EPOXY GARAGE FLOOR // DIY Epoxy Flooring TutorialDIY Easy Wood Bench / Patio Bench Build / Outdoor BenchLaminated Pine Workbench From 2x4's - WoodworkingHOW TO BUILD A SHED, PT. 1 : Framing The Floor, Walls & Roof plus SidingDrill/Driver Hanging StationHow to make A Workbench | DIY WOODWORKINGSIMPLE SHED ORGANIZING PROJECTS | Shelves, Loft, Rafters, RacksDIY LAUNDRY ROOM MAKEOVER w/ Plywood Countertops & Organization! 🧺Build Cabinets The Easy Way | How to Build CabinetsDIY How to Build a Shed A to ZUltimate T-Track Workbench + Customizable StorageInstalling The Ultimate Garage Workshop Storage SolutionGarage WORKBENCH / MITER SAW Station / OUTFEED Table Combo Build Part 1The PERFECT Woodworking Workbench // How To Build The Ultimate Hybrid Workholding BenchAWESOME Hanging Garage Shelves | DIY Garage Storage | Garage Makeover pt. 4