How To LS Swap a Squarebody C10! Or, how I did anyway...
Here I go over how I did my first LS Swap. I made plenty of mistakes and would do a few things differently but it was reliable as a daily driver all summer long. Here's everything I could remember from my parts list - if there's anything specific you're looking for, leave a comment or send me a message on instagram (@ubf_c10) and I'll do my best to help.
PSI Conversion - https://www.psiconversion.com/
This is where I got my wiring harness, fan harness, two new O2 sensors, and PCM from. Literally wired it up and fired it up like their slogan says.
HotRodFuelHose.com - http://www.hotrodfuelhose.com
This is where I got my fuel lines, fittings, and filter/regulator from. I had to ask a few questions and always really quick and super helpful.
2006 L59 5.3 (Flex Fuel)
GMC Envoy (with 5.3 v8), Buick Reinier (with 5.3 v8), Trailblazer SS exhaust manifolds - Sourced from Ebay
Power Steering Pressure Line Adapter - Gates G49702-1606 - got mine from Napa
LS/4L80E flexplate - ATP ATP-Z270 - got mine from Summit
DirtyDingo Sliding Engine Mounts - DD-2500C
DirtyDingo LS Swap Transmission Crossmember - DD-C10-TRANS
Spectra GM11C Fuel Tank
Spectra FG05N Fuel Sending Unit
Spectra ST01 Fuel Tank Strap Kit
ACDelco EP381 Fuel Pump - 1997 Chevy Silverado with the 5.7 v8
Using a bluetooth OBDII Adapter from Amazon
Using an Android Tablet and suction cup mount, with Torque Pro
Custom driveshaft from a local driveshaft shop
Stock 34" Core radiator from a 2006 GMC Yukon (requires custom mount, will cover in a later video.)
Dual fan assembly from 2006 GMC Yukon/escalade for the 34" radiator
4L80E Transmission from a 2005 Chevy Van
28" Cherry Bomb Glasspacks
Misc. 2.5" exhaust parts from the parts store
The O2 sensor stubs from any LS-equipped truck/suv/van Y pipe or build your own stubs with available flanges and O2 bungs
music by audionautix.com
Видео How To LS Swap a Squarebody C10! Or, how I did anyway... канала Eric Sabo
PSI Conversion - https://www.psiconversion.com/
This is where I got my wiring harness, fan harness, two new O2 sensors, and PCM from. Literally wired it up and fired it up like their slogan says.
HotRodFuelHose.com - http://www.hotrodfuelhose.com
This is where I got my fuel lines, fittings, and filter/regulator from. I had to ask a few questions and always really quick and super helpful.
2006 L59 5.3 (Flex Fuel)
GMC Envoy (with 5.3 v8), Buick Reinier (with 5.3 v8), Trailblazer SS exhaust manifolds - Sourced from Ebay
Power Steering Pressure Line Adapter - Gates G49702-1606 - got mine from Napa
LS/4L80E flexplate - ATP ATP-Z270 - got mine from Summit
DirtyDingo Sliding Engine Mounts - DD-2500C
DirtyDingo LS Swap Transmission Crossmember - DD-C10-TRANS
Spectra GM11C Fuel Tank
Spectra FG05N Fuel Sending Unit
Spectra ST01 Fuel Tank Strap Kit
ACDelco EP381 Fuel Pump - 1997 Chevy Silverado with the 5.7 v8
Using a bluetooth OBDII Adapter from Amazon
Using an Android Tablet and suction cup mount, with Torque Pro
Custom driveshaft from a local driveshaft shop
Stock 34" Core radiator from a 2006 GMC Yukon (requires custom mount, will cover in a later video.)
Dual fan assembly from 2006 GMC Yukon/escalade for the 34" radiator
4L80E Transmission from a 2005 Chevy Van
28" Cherry Bomb Glasspacks
Misc. 2.5" exhaust parts from the parts store
The O2 sensor stubs from any LS-equipped truck/suv/van Y pipe or build your own stubs with available flanges and O2 bungs
music by audionautix.com
Видео How To LS Swap a Squarebody C10! Or, how I did anyway... канала Eric Sabo
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Tips And Tricks I Learned When LS Swapping My C10 Squarebody](https://i.ytimg.com/vi/BxgqAWCJSx4/default.jpg)
![HELLO 5.3! - 1985 CHEVY C10 - LS SWAP - ENGINE INSTALL](https://i.ytimg.com/vi/l_rhF1Cf49o/default.jpg)
![Standalone LS Swap Harness: If I Can Do It, You Can Do It](https://i.ytimg.com/vi/GQGaUh4Yhgk/default.jpg)
![C10/C15 Square Body 6.0/4L80E LS Swap Parts List](https://i.ytimg.com/vi/augAvaCw918/default.jpg)
![Making Your LS SWAPPED Square Body START and RUN off the KEY](https://i.ytimg.com/vi/8WUSmIhlS40/default.jpg)
![LS Swap Do's & Don'ts on a Chevy K1500 - Truck Tech S6, E5](https://i.ytimg.com/vi/1Jxm0l85iU8/default.jpg)
![3 Steps To Your First LS Swap](https://i.ytimg.com/vi/eIexz04sSBY/default.jpg)
![How to LS swap an old Chevy Square Body.](https://i.ytimg.com/vi/rUxpZhGheTs/default.jpg)
![TOP 3 THINGS TO LOOK FOR WHEN BUYING A SQUAREBODY](https://i.ytimg.com/vi/c28WVzxyX30/default.jpg)
![1974 C10 Squarebody LS Swap Turbo Build - Starting It Up!](https://i.ytimg.com/vi/dzERmoczd0k/default.jpg)
![1984 C10 Project ---- LS Swap Part 7-1 (BulkHead Wiring Part 1)](https://i.ytimg.com/vi/YK3pZKTtD2g/default.jpg)
![MG #195 - What you need to know before you LS Swap your Square!](https://i.ytimg.com/vi/iJ8uXbfPQuY/default.jpg)
![LS Swapping a Squarebody C10 | YOU GOTTA WIRE TO FIRE | Part 3](https://i.ytimg.com/vi/9k2Uycxe-po/default.jpg)
![88-98 Chevy / GMC OBS Truck - LS Swap](https://i.ytimg.com/vi/uUXigyuH_yQ/default.jpg)
![1984 GMC Sierra Square body LS1 Swap w/Black Widow Exhaust](https://i.ytimg.com/vi/_whL4qtrfQ4/default.jpg)
![WELCOME TO THE JUNGLE! - 85 C10 5.3 LS Swap - Engine / Transmission Wiring + FIRST START!](https://i.ytimg.com/vi/d8mcQl-rYr4/default.jpg)
![LS Swap for Dummies - Wiring made simple - Prepping a LS Motor for your Old Hot Rod](https://i.ytimg.com/vi/bMMDbQSVYSU/default.jpg)
![1985 K10 LS swap](https://i.ytimg.com/vi/cV_0y5bIPg4/default.jpg)
![LS swapping is cheaper than you think - How to Afford your swap](https://i.ytimg.com/vi/zRgX7PiB6vQ/default.jpg)
![DOUBLE TROUBLE! - 85 C10 5.3 LS SWAP - Plumbing Fuel System With Original DUAL TANKS](https://i.ytimg.com/vi/HcaAvC2aOVY/default.jpg)