Kral Lane Regulator install.
Installing a lane regulator in your Kral Puncher rifle.
ATTENTION: Make sure the gun has been fully degassed and no remaining air is in the air reservoir before attempting any disassembly.
NOTE: Your regulator will include a packet of silicone grease. Apply a thin layer to all O-rings and seating surfaces prior to re-assembly.
Order yours here: http://laneregulators.com/shop/kral-arms-mk9-lancet-pcp-internal?tracking=58876fe599080
Видео Kral Lane Regulator install. канала Annihilator Airguns
ATTENTION: Make sure the gun has been fully degassed and no remaining air is in the air reservoir before attempting any disassembly.
NOTE: Your regulator will include a packet of silicone grease. Apply a thin layer to all O-rings and seating surfaces prior to re-assembly.
Order yours here: http://laneregulators.com/shop/kral-arms-mk9-lancet-pcp-internal?tracking=58876fe599080
Видео Kral Lane Regulator install. канала Annihilator Airguns
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to install the Altaros regulator on a bottle gun and make it look good! Kral Puncher JumboPCP Regulator: How does it Work?Kral Puncher Breaker Disassembly Video.PCP Valve New DesignCarabina pcp modelo m4'Outlet Valve' Spring Coil Binding On Low Pressure Reg Set-Up's 'Lane Regulators'Kral Puncher Jumbo .22 - FULL REVIEW (RDW)AIRGUN Repair - Power Increase - Tune / Tips + Tricks - Basic Guide PCP Air Rifle - Artemis M30Kral SSG (Spring Stop Guide)Cricket Valve stem adjustmentполная разборка крал панчерZero Hammer Rebounce Mechanism For PCP'sKral Puncher Breaker S .22 Troy Hammer Tune Full ReviewRedesign of PCP Cocking Lever to Fit Properly in StockPCP Air Gun Valve | PVC BuildThe Kral Puncher Pro 500 40 yards to 90 yards accuracyUNBOXING: Kral Arms Puncher Breaker Airgun - Budget Bullpup PCPAll new Kral MEGA 2PCP AIRGUN | Replacing enternal Regulator Orings (maintenance)Kral Arms NP-03 22cal Accuracy Testing 6 Different Pellets And Slugs @ 27 Yards Hatsan Compressor