How to Build an Office/Home PC with Windows 10 ISO and Installation (Step by Step)

How to Build an Office/Home PC with Windows 10 ISO and Installation (Step by Step) is a building process with Intel's 6th generation, Pentium G4400 as a Home and Office PC. Also includes how to create a Windows 10 USB flash drive ISO and how to install Windows 10 64-Bit to a new PC.

NOTES: Yes, it's Skylake hardware; however it was collecting dust.

If you have any questions about the build, please don't hesitate to ask!

=============================
Pentium Office Build 2021
=============================
https://pcpartpicker.com/list/TLkfGq
$415 USD (more/less)
=============================
Computer Hardware
=============================
- https://pcpartpicker.com/list/rwd7hy
CPU: Intel Pentium G4400 @ 3.3GHz Dual-Core
Motherboard: GA-H110M-M.2 Micro ATX LGA1151
Memory: Patriot Viper Elite 8GB (1 x 8GB) DDR4-2133
SSD: ADATA SU800 128GB M.2-2280
HDD: Seagate Barracuda 1TB 3.5" 7200RPM
Case: DIYPC MA08-BK MicroATX Mini Tower (Repurpose)
PSU: SeaSonic S12II 430W 80+ Bronze Certified ATX
Optical Drive: Samsung SH-118CB/BEBE DVD/CD Drive
Operating System: Windows 10 Home 64-bit
Total: $369.10

=============================
Timeline
=============================
1) The CPU @ 00:07
2) The Motherboard @ 00:15
3) The RAM @ 00:20
4) The M.2 SSD @ 00:25
5) The Hard Drive @ 00:30
6) The PSU @ 00:34
7) The Optical Drive @ 00:39
8) The Case (Repurpose) @ 00:43
9) Uninstall the case Panels @ 00:47
10) Uninstall Front Panel @ 01:25
11) Uninstall the Storage Panel @ 01:45
12) Route PSU cables @ 02:15
13) 4 PSU screws @ 03:42
14) Install the PSU @ 03:46
15) Undo CPU latch (MOBO) @ 04:20
16) Install the CPU @ 04:31
17) Install the Stockfan (CPU Cooler) @ 04:50
18) Unscrew the M.2 screw (MOBO) @ 05:43
19) Install the M.2 SSD @ 05:51
20) Push down the DDR4 latch @ 06:10
21) Install the RAM @ 06:16
22) Install the I/O Shield @ 06:34
23) Six MOBO Standoffs @ 06:49
24) Align the MOBO with standoffs and I/O ports @ 07:02
25) 6 Motherboard screws @ 07:19
26) Install the Motherboard @ 07:24
27) Connect 1 of 4-pin ATX PSU (8-pin) to MOBO @ 08:59
28) Connect the 3-pin case fan @ 09:20
29) Connect the Molex front case fan @ 09:28
30) Remove 3.5 inch bay cover @ 09:46
31) Remove 5.25 inch bay cover @ 09:58
32) Reinsert 3.0 USB and Front Panel cable @ 10:13
33) Reinstall the Front Panel @ 10:29
34) Insert the Optical Drive to 5.25" Bay @ 11:32
35) The 2 Optical Drive screws @ 11:49
36) 9-pin HD Audio @ 12:31
37) Connect HD Audio to F_AUDIO @ 12:56
38) 9-pin 2.0 USB @ 13:09
39) Connect 2.0 USB to F_USB @ 13:32
40) 2-pin Reset Switch @ 13:47
41) 2-pin Power Switch @ 13:51
42) 1+1-pin Power LED + & - @ 13:55
43) Hard Drive Disk LED + - @ 13:59
44) Diagram Connections @ 15:01
45) Connect Hard Drive LED + - to +HD-
46) Connect Reset Switch to -RES+ @ 15:26
47) Connect Power LED + - to +PLED- @ 15:37
48) Connect Power Switch to +PW- @ 15:53
49) Connect 24-pin PSU cable to ATX @ 16:24
50) Connect 3.0 USB to F_USB 3.0 @ 16:53
51) Insert 3.5 inch Hard Drive into 3.5 inch bay @ 17:04
52) 2 screws for Hard Drive @ 17:15
53) Install Hard Drive @ 17:19
54) Reinsert the 3.5 inch cover bay @ 17:45
55) The SATA @ 18:08
56) Connect the SATA (PSU) to Optical Drive @ 18:12
57) Connect the SATA (PSU) to Hard Drive @ 18:28
58) AC power cord @ 18:47
59) Plug AC cord to PSU @ 18:51
60) I/O Switch to ON @ 18:57
61) Plug AC cord to Power Surge @ 18:59
62) Press the Power button @ 19:06
63) Turn OFF the computer @ 19:31
64) 3 Velcro straps @ 20:36
65) Connect the Peripheral Power and Molex together @ 22:40
66) 2 SATA cables @ 23:09
67) Connect Right Angle SATA cable to Optical Drive @ 23:13
68) Connect Right Angle SATA cable to SATA3_0 @ 23:36
69) Connect Straight SATA cable to 3.5 inch Hard Drive. @ 23:51
70) Connect Straight SATA cable to SATA3_2 @ 24:19
71) Zip-tied other cables/wires @ 24:30
72) Cable manage behind the MOBO @ 24:46
73) Reinstall the Right Panel (panel behind MOBO) @ 25:03
74) 2 PCI Slot Covers (not included nor required) @ 25:37
75) Install the PCI Slot Covers @ 25:43
76) Reinstall the storage panel @ 26:22
77) The original screws from the storage panel @ 26:40
78) Reinstall the left panel @ 27:10
79) Transcend's 3.0 8GB USB Flash Drive @ 27:29
80) Insert flash drive to a different PC (with Windows) @ 27:33
81) Go to "your" Browser and type Windows 10 ISO @ 27:48
82) Click Download Tool now @ 28:05
83) Eject flash drive from Windows first @ 29:17
84) Remove the flash drive from the computer @ 29:25
85) Back to the custom computer, turn it ON @ 29:29
86) How to get into the BIOS @ 29:48
87) Insert the USB flash drive to the custom computer @ 30:51
88) Begin Windows 10 installation @ 30:58
89) Setup your Administration Account @ 32:11
90) Recommendations @ 33:47

=============================
Music: Nostalgic Pull
Artist: Asher Fulero
"Sound effect & music was provided by YouTube Audio Library."

Видео How to Build an Office/Home PC with Windows 10 ISO and Installation (Step by Step) канала Eltech