Загрузка страницы

Echo Carburetor Adjustment Tool-Bogging Blower PB-580T

This video I show you how to make your own walbro carburetor adjustment tool for Echo blowers. Head to your local hardware store and pick up a 1/8x2 inch roll pin or compression pin. Using some metal on metal force shape the end into a D to fit your H and L screws on your carburetor. If you have clearance issues and your too big for the hole then I am sorry...you'll have to do a little work with a grinder or sander to take some material off. Once you get it the right size you are in business. If you blower bogs and dies at WOT then turn the H screw counter clockwise after the engine is warmed up in 1/4 turn increments until you are able to get smooth performance. Good luck and the pin costed me 43 cents! Maybe I'll slap a antler handle on it soon...

Видео Echo Carburetor Adjustment Tool-Bogging Blower PB-580T канала Dan Does Stuff
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
26 июня 2020 г. 7:47:21
00:04:30
Яндекс.Метрика