How To: Replace Rear Shock Absorbers
How to install new shocks. Shocks (and struts) wear out so gradually, it’s nearly impossible to feel the difference while you’re driving. Old shock absorbers can affect your steering and braking are affected, and the stability of your ride—as well as the condition of your tires—can deteriorate considerably. It’s recommended you have shocks and struts professionally inspected every fifty thousand miles. Fortunately, with a few tools, you can replace and install rear shocks yourself.
Supplies Needed for This Job:
1. Safety Glasses: https://urlzs.com/hbwc
2. Gloves: https://bit.ly/2GvfwAm
3. Shock Absorbers: http://bit.ly/2oiGswC
4. Socket Wrench: http://bit.ly/2JiE0yF
5. Sockets: http://bit.ly/2UUqY1p
6. Pry Bar: http://bit.ly/2J8caGj
7. Mallet: http://bit.ly/2XGMROM
8. Torque Wrench: http://bit.ly/2UToD1D
0:00 Welcome Back
0:37 Lift Your Vehicle
1:05 Remove the Old Shock
2:04 Prime the New Shock
2:35 Install the New Shock
3:30 Replace the Wheel
Facebook: https://www.facebook.com/oreillyautoparts/
Instagram: https://www.instagram.com/oreillyautoparts/
Twitter: https://twitter.com/oreillyauto
Find your local O’Reilly Auto Parts: https://www.oreillyauto.com/locations
Check out Saab Kyles Favorite Garage Supplies: https://urlzs.com/jg78
Shop all your automotive needs: https://www.oreillyauto.com/
Subscribe and ring the notification bell! http://bit.ly/2bTyluF
On our channel we cover several different topics:
Automotive Product Overviews
Do It Yourself Automotive Repair
DIY Auto Maintenance
Simple Automotive Diagnostics
Automotive and Vehicle Education Videos
O’Reilly Auto Parts is an auto parts retailer that provides automotive aftermarket parts, tools, supplies, equipment, and accessories in the United States serving both the professional service providers and do-it-yourself customers. From our roots as a single store in 1957 to our current size of 5,219 locations (and growing), we've come a long way. We pride ourselves on offering well researched, and reliable automotive information on our channel.
#OReillyPowered #CarRepair
#TeamOReilly #CarMaintenance
Transcript:
Once you’ve got your supplies together, here’s what you’ll do:
Jack up your vehicle and put it on stands.
Start by removing the rear wheel where you’ll be working.
Then, place a jack under the lower ball joint or control arm.
Raise the jack upward slightly to relieve the tension of the suspension.
The shock absorber will be connected to the top shock mount by a bolt, and by a nut at the bottom shock mount on the suspension knuckle.
There will also be a third bolt for the splash guard that bolts directly into the absorber.
Use penetrating oil if needed to loosen the bolts and nut.
Use your socket wrench and 10mm socket to remove the splash guard bolt… and splash guard.
Then, remove the bottom nut using your 19mm socket.
Next, remove the top bolt with your 24mm socket.
You should be able to remove the shock absorber now.
Start at the top by pulling it away from the shock mount.
Then, push it away from the bottom shock mount.
If you have trouble you may need to use a pry bar and mallet to loosen the shock.
Before installing a new shock absorber it is recommended to manually pump them 3 to 5 times.
When you do that, make sure the shock is oriented the way it will be in the vehicle, top side up.
This primes the shock and reduces the break-in period by getting the hydraulic fluid and nitrogen gas redistributed correctly, since the shock has likely been sitting horizontally on a shelf and during shipment.
If the shock is packaged with a band on it, you may want to wait until it’s in place to cut the band.
Once it’s cut, the shock will extend fully.
To install the new shock absorber, first make sure it’s in the proper orientation so the splash guard at the base of the shock can be reinstalled correctly.
Connect the shock to the bottom shock mount.
Then, compress the shock and work it into the top shock mount.
Reinstall and finger-tighten the top bolt… and the bottom nut.
Don’t torque these till the wheel is replaced and the vehicle is lowered so that the suspension is loaded.
[The top bolt should be at 137.3 ~ 159.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)]
[The bottom nut should be at 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)]
Use the third bolt to reinstall the splash guard.
Replace the wheel and tighten the lug nuts to manufacturer specifications. [88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)]
As always, be sure all bolts are tightened to manufacturer specifications.
Shocks should be replaced in pairs, so repeat these steps on the other side.
Видео How To: Replace Rear Shock Absorbers канала O'Reilly Auto Parts
Supplies Needed for This Job:
1. Safety Glasses: https://urlzs.com/hbwc
2. Gloves: https://bit.ly/2GvfwAm
3. Shock Absorbers: http://bit.ly/2oiGswC
4. Socket Wrench: http://bit.ly/2JiE0yF
5. Sockets: http://bit.ly/2UUqY1p
6. Pry Bar: http://bit.ly/2J8caGj
7. Mallet: http://bit.ly/2XGMROM
8. Torque Wrench: http://bit.ly/2UToD1D
0:00 Welcome Back
0:37 Lift Your Vehicle
1:05 Remove the Old Shock
2:04 Prime the New Shock
2:35 Install the New Shock
3:30 Replace the Wheel
Facebook: https://www.facebook.com/oreillyautoparts/
Instagram: https://www.instagram.com/oreillyautoparts/
Twitter: https://twitter.com/oreillyauto
Find your local O’Reilly Auto Parts: https://www.oreillyauto.com/locations
Check out Saab Kyles Favorite Garage Supplies: https://urlzs.com/jg78
Shop all your automotive needs: https://www.oreillyauto.com/
Subscribe and ring the notification bell! http://bit.ly/2bTyluF
On our channel we cover several different topics:
Automotive Product Overviews
Do It Yourself Automotive Repair
DIY Auto Maintenance
Simple Automotive Diagnostics
Automotive and Vehicle Education Videos
O’Reilly Auto Parts is an auto parts retailer that provides automotive aftermarket parts, tools, supplies, equipment, and accessories in the United States serving both the professional service providers and do-it-yourself customers. From our roots as a single store in 1957 to our current size of 5,219 locations (and growing), we've come a long way. We pride ourselves on offering well researched, and reliable automotive information on our channel.
#OReillyPowered #CarRepair
#TeamOReilly #CarMaintenance
Transcript:
Once you’ve got your supplies together, here’s what you’ll do:
Jack up your vehicle and put it on stands.
Start by removing the rear wheel where you’ll be working.
Then, place a jack under the lower ball joint or control arm.
Raise the jack upward slightly to relieve the tension of the suspension.
The shock absorber will be connected to the top shock mount by a bolt, and by a nut at the bottom shock mount on the suspension knuckle.
There will also be a third bolt for the splash guard that bolts directly into the absorber.
Use penetrating oil if needed to loosen the bolts and nut.
Use your socket wrench and 10mm socket to remove the splash guard bolt… and splash guard.
Then, remove the bottom nut using your 19mm socket.
Next, remove the top bolt with your 24mm socket.
You should be able to remove the shock absorber now.
Start at the top by pulling it away from the shock mount.
Then, push it away from the bottom shock mount.
If you have trouble you may need to use a pry bar and mallet to loosen the shock.
Before installing a new shock absorber it is recommended to manually pump them 3 to 5 times.
When you do that, make sure the shock is oriented the way it will be in the vehicle, top side up.
This primes the shock and reduces the break-in period by getting the hydraulic fluid and nitrogen gas redistributed correctly, since the shock has likely been sitting horizontally on a shelf and during shipment.
If the shock is packaged with a band on it, you may want to wait until it’s in place to cut the band.
Once it’s cut, the shock will extend fully.
To install the new shock absorber, first make sure it’s in the proper orientation so the splash guard at the base of the shock can be reinstalled correctly.
Connect the shock to the bottom shock mount.
Then, compress the shock and work it into the top shock mount.
Reinstall and finger-tighten the top bolt… and the bottom nut.
Don’t torque these till the wheel is replaced and the vehicle is lowered so that the suspension is loaded.
[The top bolt should be at 137.3 ~ 159.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)]
[The bottom nut should be at 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)]
Use the third bolt to reinstall the splash guard.
Replace the wheel and tighten the lug nuts to manufacturer specifications. [88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)]
As always, be sure all bolts are tightened to manufacturer specifications.
Shocks should be replaced in pairs, so repeat these steps on the other side.
Видео How To: Replace Rear Shock Absorbers канала O'Reilly Auto Parts
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Replace Shock Absorbers on your car FAST and EasyHow to Replace Shocks with basic hand toolsIf Your Truck Does This REPLACE YOUR SHOCKS IMMEDIATELY!!How to Replace Rear Shocks 09-19 Ford FiestaRear Shock Absorber Replacement - Toyota YarisHow to Replace a Rear Coil SpringGood Shocks Vs Bad Shocks : 5 Ways To TellDIY SHOCK ABSORBERS REPLACEMENT (FG FALCON) "THEUSOWAY"How to Replace Struts in your Car or TruckRear Shocks Install - Chevy SilveradoTOYOTA COROLLA SHOCK ABSORBER REAR REPLACEHow to - Replace Shock Absorbers // Supercheap Auto2014 Maserati Granturismo Sport Rear Strut removal and install of lowering springsHonda Civic Rear Shock Replacement 2006 (2006-2011 Similar)Most Common Strut Installation Mistakes!How to Install a COMPLETELY New Front Suspension in your Car or TruckRear Shock Absorber | How to install/replace/change | DIY | KYB KAYABA | Toyota AvanzaHow to Identify Defective Shock Absorbers | Know Your PartsNissan Navara D40 2007 Shock Absorber Replacement