Installing Stove Flue Pipe and Roof Exit Kit - { Cubic Mini Install Part 3 }

In this video we installed the flue pipe and roof exit kit for the cubic mini stove.

We found out after the install that our clearance to the ceiling is off and the shelf we installed was too close, so we'll be installing sheet metal to make it safe. I had a hard time finding the clearance requirements on their site so here they are:

Clearances required are 20” in all directions lateral to the stove unless installed with one of our wall mounts. If no shielding is present then you need to provide 20” clearance to combustibles. A 30” Clearances applies to the top of the stove to the surface above. Under the stove should also be shielded and an air gap should be provided.

1st video: https://www.youtube.com/watch?v=nNswPLMOzbw&t
2nd video: https://www.youtube.com/watch?v=2QUQyoUYkJ4&t
3rd video: https://www.youtube.com/watch?v=-Haw55RSZ-U

--

Free skoolie resources! http://bit.ly/SkoolieSite

Follow on Instagram - http://bit.ly/colaventures

$15 Skoolie Shirts - http://bit.ly/skoolieshirts
Below are the products we purchased:
Cubic Mini Stove (GRIZZLY) - https://cubicminiwoodstoves.com/products/cb-1210-br-cubic-mini-wood-stove?variant=1331904548

Stainless Steel Wall Mount - https://cubicminiwoodstoves.com/products/cb-4012-ss-stainless-steel-wall-mount-1

Metal roof exit kit - https://cubicminiwoodstoves.com/products/metal-roof-exit-kit

Flue Pipes - https://cubicminiwoodstoves.com/products/copy-of-cb-3024-ss-3-stainless-steel-double-wall-flue-pipe-24-section

High Temp Silicone: https://amzn.to/2HY6NKn

Roof Screws we should have bought: https://amzn.to/36uRXoQ

Tools we like:

Drill - https://amzn.to/2GxRDuy

Angle Grinder - https://amzn.to/3lhRLNF

Jig saw - https://amzn.to/3ixv0Ur

Tin snips - https://amzn.to/3iu2enx

Measuring tape - https://amzn.to/2HX5fQN

#skoolie

#cubicmini

Видео Installing Stove Flue Pipe and Roof Exit Kit - { Cubic Mini Install Part 3 } канала ColaVentures