5" Micro Drone...Wait, WHAT?? 😳 Propellers TOO BIG for Quadcopter Frame
You can now support RCwithAdam (and gain special perks!) HERE: https://ko-fi.com/rcwithadam 🤗
Visit my website here: https://rcwithadam.com/ 💻
Only have a minute? Skip to 11:05 for a super sweet B-roll flight sequence!
*Don't try this at home* Time for Adam to try another one of his ridiculous ideas!! Let's see if we can cram the electronics of a 5" sized FPV drone into a 3" size quadcopter frame... and still fly it!
3D Printed Propeller Hub Part II https://www.youtube.com/watch?v=N_MEBnrS_Ek
COMMENT BELOW what you learned from this video!
👉UPDATE 4.22.20: HERE ARE LINKS to the TinkerCAD designs for the motor adapters, in case you're interested!
Tall adapter https://www.tinkercad.com/things/fmduAr23qEY
Short adapter: https://www.tinkercad.com/things/5ch9WvfG8hy
NOTE: This design is not perfect, and if I were to use them again I would make a few changes to give the holes extra wall thickness.
This is the filament I used for the 3D prints https://amzn.to/35pqJxc
*SAFETY NOTE: for the close-up shots of the quad flying, I made sure to where safety glasses to protect my eyes in case something unexpected was to happen. Be prepared!
#microdrone #makersgonnamake
Support RCwithAdam by purchasing through these links!
Amazon https://amzn.to/2FHjkwI
Banggood https://www.banggood.com/custlink/KvmDJdaqrC
I have a website http://rcwithadam.com/
-------
RC with Adam GEAR
RADIO: https://amzn.to/2osIur0 https://www.banggood.com/custlink/3KvvWylkJ0
QUAD RECEIVER: https://amzn.to/2CsvX0C https://www.banggood.com/custlink/v3vDJYjMWs
AIRPLANE RECEIVER: https://amzn.to/2OBIqnj https://www.banggood.com/custlink/GG3vryakFJ
QUAD PROPS (my fav) https://amzn.to/2DywVXA https://www.banggood.com/custlink/GGKGpRjkJz
RC with Adam FILMING GEAR
Main camera https://amzn.to/2pGZA4L
Action Camera https://amzn.to/3dVW6DE
Mic https://amzn.to/2OKoCOB
Camera stand https://amzn.to/2C4I3uX
--------
Mandatory Disclaimer:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
**REMEMBER, always use caution and your best judgement when building and flying RC aircraft, be a good neighbor, and HAVE FUN!**
-----------
About RC with Adam: Adam makes FUN and HELPFUL videos about Radio Controlled aircraft, tech, and DIY projects! #RCwithAdam
Видео 5" Micro Drone...Wait, WHAT?? 😳 Propellers TOO BIG for Quadcopter Frame канала RCwithAdam
Visit my website here: https://rcwithadam.com/ 💻
Only have a minute? Skip to 11:05 for a super sweet B-roll flight sequence!
*Don't try this at home* Time for Adam to try another one of his ridiculous ideas!! Let's see if we can cram the electronics of a 5" sized FPV drone into a 3" size quadcopter frame... and still fly it!
3D Printed Propeller Hub Part II https://www.youtube.com/watch?v=N_MEBnrS_Ek
COMMENT BELOW what you learned from this video!
👉UPDATE 4.22.20: HERE ARE LINKS to the TinkerCAD designs for the motor adapters, in case you're interested!
Tall adapter https://www.tinkercad.com/things/fmduAr23qEY
Short adapter: https://www.tinkercad.com/things/5ch9WvfG8hy
NOTE: This design is not perfect, and if I were to use them again I would make a few changes to give the holes extra wall thickness.
This is the filament I used for the 3D prints https://amzn.to/35pqJxc
*SAFETY NOTE: for the close-up shots of the quad flying, I made sure to where safety glasses to protect my eyes in case something unexpected was to happen. Be prepared!
#microdrone #makersgonnamake
Support RCwithAdam by purchasing through these links!
Amazon https://amzn.to/2FHjkwI
Banggood https://www.banggood.com/custlink/KvmDJdaqrC
I have a website http://rcwithadam.com/
-------
RC with Adam GEAR
RADIO: https://amzn.to/2osIur0 https://www.banggood.com/custlink/3KvvWylkJ0
QUAD RECEIVER: https://amzn.to/2CsvX0C https://www.banggood.com/custlink/v3vDJYjMWs
AIRPLANE RECEIVER: https://amzn.to/2OBIqnj https://www.banggood.com/custlink/GG3vryakFJ
QUAD PROPS (my fav) https://amzn.to/2DywVXA https://www.banggood.com/custlink/GGKGpRjkJz
RC with Adam FILMING GEAR
Main camera https://amzn.to/2pGZA4L
Action Camera https://amzn.to/3dVW6DE
Mic https://amzn.to/2OKoCOB
Camera stand https://amzn.to/2C4I3uX
--------
Mandatory Disclaimer:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
**REMEMBER, always use caution and your best judgement when building and flying RC aircraft, be a good neighbor, and HAVE FUN!**
-----------
About RC with Adam: Adam makes FUN and HELPFUL videos about Radio Controlled aircraft, tech, and DIY projects! #RCwithAdam
Видео 5" Micro Drone...Wait, WHAT?? 😳 Propellers TOO BIG for Quadcopter Frame канала RCwithAdam
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
TRICOPTER LR - Long Range FPV, 1h+ Flight time, Foldable multirotor - Build Video.Props-In (Standard) vs. Props-Out (Reversed) | WHICH IS BETTER?I built a 12S fpv miniquad that runs at 50 volts and sounds INSANERace 6 - DHL TowerFlySky FS-i6X How to Setup TOP 5 FUNCTIONS for BEGINNER PILOTSiFlight Baby Nazgul // So Small // Great Playground DroneDrone Propeller Basics - Propellers for noobsA Flexible 3D Printed Drone That Can't Breakthis took 7 tries! – working through a new FPV trick$300 is "budget" for an FPV quad in 2021. Deal with it. (DIATONE ROMA F5 V2 REVIEW)He gave me a "160 mph" Racing Drone. I'M NOT WORTHY!Quadcopter Propeller Anatomy for Beginners | HOW TO INSTALL PROPS CORRECT DIRECTIONLong(er) Range Test CrossoverRX FLYSKY Receivers 401-A, 602T-A, FatShark Scout FPV18650 on Emax TinyHawk 2 (FatHawk) - Part 1Micro FPV Drone Build (Armattan TADPOLE!)What I LEARNED after 1 YEAR of Flying FPV DRONES!Pushing 8 blade props to 65,000 RPMLearn to fly an FPV Drone like a Pro - 2021 Basics of FPV and what to buy this yearUmmagawd 2Fiddy changed my mind about sub-250g freestyle (vs. GEPRC Smart35 HD)