Laser Engraved Wall Mirror | CO2 vs Fiber Laser Sources | Mirror Acrylic
This week in the FLEXX zone we're laser engraved a wall mirror made from our TroGlass Mirror extruded acrylic. We'll show you how you can use both CO2 and Fiber laser sources when engraving the acrylic mirror.
For CO2 laser source, we flip the mirrored acrylic over and reverse engrave our design (flip our design horizontally). We then spray paint the back and let it dry.
For Fiber laser source, we put the mirror facing up. The fiber laser is a different wave length so it passes through the top clear acrylic layer hitting and dissolving the thin bottom mirror layer.
We found that engraving this material with the Fiber laser is a better engraving than CO2. However you still need a CO2 laser to cut out the shape of the mirror.
This is why the Trotec FLEXX laser has both CO2 and Fiber in one machine, making it the perfect laser machine!
WANT TO BUY TroGlass Mirror Acrylic? Click Here:
https://www.engraving-supplies.ca/acrylic-sheets/troglass-mirror.html
***LASER SETTINGS***
Laser: Trotec Speedy 360 FLEXX (CO2 and Fiber) - 80w
CO2 Engraving: 65 power, 100 speed, -0.12 z-offset
Fiber Engraving: 40 power, 55 speed
CO2 Cutting: 100 power, 0.8 speed
------------------------------------------------------------------------------------------
To get a quote on our laser engraving and cutting machines, please contact us below:
Phone: 1 (888) 998 2217
Email: youtube@troteclaser.ca
Follow us on social media:
Facebook: https://goo.gl/UfHnEa
Twitter: https://goo.gl/GEgTwQ
Instagram: https://goo.gl/gJN5b4
LinkedIn: https://goo.gl/oBL6V4
Trotec Canada locations:
Vancouver | 20381 62 Ave #705, Langley, BC V3A 5E6
Calgary | 820 28 St NE #2, Calgary, AB T2A 6K1
Toronto | 1705 Argentia Rd #9, Mississauga, ON L5N 3A9
Montreal | 8096 Trans Canada Route, Saint-Laurent, QC H4S 1M5
Видео Laser Engraved Wall Mirror | CO2 vs Fiber Laser Sources | Mirror Acrylic канала Trotec Laser Canada
For CO2 laser source, we flip the mirrored acrylic over and reverse engrave our design (flip our design horizontally). We then spray paint the back and let it dry.
For Fiber laser source, we put the mirror facing up. The fiber laser is a different wave length so it passes through the top clear acrylic layer hitting and dissolving the thin bottom mirror layer.
We found that engraving this material with the Fiber laser is a better engraving than CO2. However you still need a CO2 laser to cut out the shape of the mirror.
This is why the Trotec FLEXX laser has both CO2 and Fiber in one machine, making it the perfect laser machine!
WANT TO BUY TroGlass Mirror Acrylic? Click Here:
https://www.engraving-supplies.ca/acrylic-sheets/troglass-mirror.html
***LASER SETTINGS***
Laser: Trotec Speedy 360 FLEXX (CO2 and Fiber) - 80w
CO2 Engraving: 65 power, 100 speed, -0.12 z-offset
Fiber Engraving: 40 power, 55 speed
CO2 Cutting: 100 power, 0.8 speed
------------------------------------------------------------------------------------------
To get a quote on our laser engraving and cutting machines, please contact us below:
Phone: 1 (888) 998 2217
Email: youtube@troteclaser.ca
Follow us on social media:
Facebook: https://goo.gl/UfHnEa
Twitter: https://goo.gl/GEgTwQ
Instagram: https://goo.gl/gJN5b4
LinkedIn: https://goo.gl/oBL6V4
Trotec Canada locations:
Vancouver | 20381 62 Ave #705, Langley, BC V3A 5E6
Calgary | 820 28 St NE #2, Calgary, AB T2A 6K1
Toronto | 1705 Argentia Rd #9, Mississauga, ON L5N 3A9
Montreal | 8096 Trans Canada Route, Saint-Laurent, QC H4S 1M5
Видео Laser Engraved Wall Mirror | CO2 vs Fiber Laser Sources | Mirror Acrylic канала Trotec Laser Canada
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Acrylique Miroir Impression UV | Acrylique miroir découpé au laser | TrotecLaser Engraving Memorial Plaque | Laserable Aluminum | TrotecTroLase Reverse: A Comprehensive ROI Breakdown for Reverse Engraving Material⚡ Weekly Webinar: Introduction to Galvo Lasers 💥Large Format Laser Challenge with the SP2000 and Rhino3DOur Vision For Trotec RubyTrotec Laser Canada - JobControl VisionIndustrial Parts Marking Webinar ⚡ Friday, Feb 10, 2023 at 12PM ESTGuide d'entretien général laser étape par étape pour Trotec Speedy 360Finding The Right Laser Settings - Webinar Friday June 4, 2021 at 11am ETBroche de Noël | Acrylique brillant découpé au laser | Épingles en acrylique brillantCL50 Custom CO2 Laser Solutions | High Speed Laser Marking System8 façons d'apporter des lasers au café - affaires et au-delàMasque COVID19 | Masque EPI à une feuille | TrotecFilm découpée au laser | Film laserable | Rouleau Laser FoilLaser Custom Jewellery with Made You Look 💎⚡Creating Stunning Layered Wood Maps with Trotec Laser Machines: A Showcase of Black Capped DesignsDes éléments de marketing sur les consommables | Trotec LaserAlignement du faisceau laser Trotec | Guide pas à pasEngraving Company | Stamps, Signs and Trophies | MicroMax+Laser Engraved Bamboo Tiki Cups | TroGlass Acrylic Swizzle Sticks