Trying Cheap Printable Shrink Plastic 😮(review)

Printable on INKJET only! Printable laser shrink plastic does not exist! Laser printer uses heat to lay the ink down. And shrink plastic shrinks with heat....so you can imagine what could happens if you try to use laser printer.

Printer I use: canon pixma TS6220

Here’s a video on how to print on shrink plastic:
https://youtu.be/Idhpw1FfFyY

Buy me a cup of "resin" to help me support this channel: https://ko-fi.com/amymade
Instagram: @emii.alchemii
Amy.madeYT@gmail.com
My Shop: https://www.emiialchemii.com
tiktok: @amymadee

Prices as of Oct 2021*

Affiliate links are marked with * . If you use my affiliate links, I get a small commission at

*Auijiay Printables (white): https://amzn.to/3oIvZrt
*Auijiay printables (white and clear): https://amzn.to/3Fik75v
*Grafix printables (white): https://amzn.to/3uLhHqY
*Rustoleum sealer spray: https://amzn.to/3abNesD

Supplies I used were purchased from many places including my local craft stores, Etsy, Ebay, Amazon, Sophie&Toffee, Miniature Sweets, and Aliexpress.

IMPORTANT NOTICE: Please ALWAYS use resin with proper precautions including wearing proper PPEs (glove, mask, respirator etc) AND working in a well ventilated space. I recommend getting a hold of the SDS (Safety Data Sheet) info that every resin company has available to the public (by law). This has all the info about the resin you are using including the precautions you need to take and first aid care. Watch my resin safety video for more info: https://youtu.be/IB_OyP0zIgE

Resin I use: affiliate links are marked with * . If you use my affiliate links, I get a small commission at no cost to you.
-*Liquid diamond casting resin: https://www.theepoxyresinstore.com/collections/craft-and-jewelry-epoxy-resin/products/crystal-clear-epoxy-resin-for-decorative-casting-and-crafting-liquid-diamonds?aff=36(coupon code for 20% off : CRAFTERSDELIGHTS20)
-Faux Rizzle Noveau resin: https://artresinfauxrizzle.com
-UV-LED resin:https://www.emiialchemii.com/product/uv-led-resin
Why do I use two different types of resin in my projects?
I use a casting resin to cast and a doming resin for doming.
Casting resin is usually low in viscosity and works very well in molds without much issue with the bubbles. Also the low viscosity will allow the resin to reach detailed area of the mold. Doming resin is thick in viscosity and holds its shape very nicely. It creates a full dome and tends to hold the surface tension much better than low viscosity resin. So lower risk of the resin dripping off the sides. It also gives the piece a smooth, flawless finish.

Videos for Resin Beginners:
Part 1 https://youtu.be/H7u2lvylzV8
Part 2 https://youtu.be/vu5LxIP33ps
Part 3 https://youtu.be/7wa5aepI-aw
How to Fill and Seal Shaker Charms: https://youtu.be/lNpM20GluKw

BGM🎈Song : Daystar - SOSO / https://youtu.be/any_Ha0SdX8

Видео Trying Cheap Printable Shrink Plastic 😮(review) канала AmyMade