🧶 Finished Project Crop Zip Hoodie Fixed Ribber SR50 Knitting Machine Singer Studio Silver GemFOX

A tiny zip hoodie I made with a limited amount of yarn. I hit a wall midway when my ribber suddenly became uncooperative. Thanks to the community's advice, I was able to get the machine setup rectified to complete the project. I was on a roll with the freestyle design - hitting that speed bump tried my life, but you guys saved my sanity! Thanks!

P.S. Why did it suddenly stop ribbing properly to begin with? Most likely because the weight of yarn I was using. It's a sport weight or DK acrylic that I had to knit at tension/stitch size 10 (on this standard 4.5mm machine). Probably better suited for the 9mm bulky machine on a small tension/stitch size#.
I think it was really hard on the machine, especially after ripping rows repeatedly, some needles got bent - the hooks' curves opening to the point where they were getting caught in the presser as the carriage would roll by, this and the extra 1mm gap between the beds caused by me not flipping up the small blue pile levers was making the ribber carriage disengage from the upper carriage. Corrected those things, ribber working now. So happy, so grateful.

Видео 🧶 Finished Project Crop Zip Hoodie Fixed Ribber SR50 Knitting Machine Singer Studio Silver GemFOX канала GemFOX Food and Craft